9 - 23– +ELECCHARGING SYSTEMEB804010TROUBLESHOOTINGProcedureCheck:1.Fuse (main)2.Battery3.Charging voltageIF THE BATTERY IS NOT CHARGED:4.Charging coil resistance5.Wiring connections(the entire charging system)NOTE: Remove the following part(s) beforetroubleshooting:1)Seat2)Fuel tank side panels Use the following special tool(s) fortroubleshooting.Inductive tachometer:P/N. YU-8036-AEngine tachometer:P/N. 90890-03113Pocket tester:P/N. YU-03112, 90890-03112EB802011CONTINUITY1.Fuse (main)Refer to “CHECKING THE SWITCH”.NO CONTINUITYReplace the fuse.EB802012CORRECT2.Battery Check the battery condition.Refer to “CHECKING THE BATTERY” inCHAPTER 3.Open-circuit voltage:12.8 V or more at 20 °C (68 °F)INCORRECT Clean the battery terminals. Recharge or replace the battery.EB8040113.Charging voltage Connect the engine tachometer to thespark plug lead #1. Connect the pocket tester (DC 20 V) to thebattery.Tester (+) lead → Battery (+) terminalTester (–) lead → Battery (–) terminal
