8 - 29CHASFRONT AND REAR BRAKESINSTALLING THE REAR BRAKE CALIPER1.Install: Brake caliper assembly Brake caliper mounting bolt 1 Brake hose 2 Copper washers 3 Union bolt 4T R..30 Nm (3.0 m • kg, 22 ft • lb)NewT R..30 Nm (3.0 m • kg, 22 ft • lb)2.Fill: Brake reservoirCAUTION:Brake fluid may damage painted surfacesor plastic parts. Always clean up spilledbrake fluid immediately.WARNING Use only the designated quality brakefluid: other brake fluids may deterioratethe rubber seals, causing leakage andpoor brake performance. Refill with the same type of brake fluid:mixing brake fluids may result in aharmful chemical reaction and lead topoor brake performance. Be careful that water does not enter themaster cylinder when refilling. Water willsignificantly lower the boiling point of thebrake fluid and may result in vapor lock.3.Air bleed Brake systemRefer to “BLEEDING THE HYDRAULICBRAKE SYSTEM” in CHAPTER 3.4.Check: Brake fluid levelBrake fluid level is under the “LOWER” levelline → Fill up.Refer to “CHECKING THE BRAKE FLUIDLEVEL” in CHAPTER 3.Recommended brake fluid:DOT 4
