4 - 54ENGCLUTCH2.Check: Clutch shoeHeat damage → Replace.3.Measure: Clutch shoe thicknessOut of specification → Replace.Clutch shoe thickness:1.5 mm (0.06 in)Clutch shoe wear limit a:1.0 mm (0.04 in)INSTALLING THE CLUTCH1.Install: Collar Clutch carrier assembly Nut 1NOTE: Lubricate the nut with molybdenum disulfideoil. Use a clutch holding tool 2 to hold the clutchcarrier assembly.2.Lock the threads with a drift punch.Clutch holding tool:P/N. YM-91042, 90890-04086NewT R..140 Nm (14.0 m • kg, 100 ft • lb)3.Install: One-way clutch bearingNOTE:The one-way clutch bearing should beinstalled in the clutch carrier assembly with thearrow mark a facing toward the clutchhousing.
