8 - 8CHASFRONT AND REAR BRAKESCAUTION:Disc brake components rarely requiredisassembly. DO NOT: disassemble components unlessabsolutely necessary; use solvents on internal brakecomponents; use spent brake fluid for cleaning; (useonly clean brake fluid) allow brake fluid to come in contact withthe eyes, as this may cause eye injury; splash brake fluid onto painted surfaces orplastic parts, as this may cause damage; disconnect any hydraulic connection, asthis would require the entire brakesystem to be disassembled, drained,cleaned, properly filled and bled afterreassembly.REPLACING THE FRONT BRAKE PADNOTE:It is not necessary to disassemble the brakecaliper and brake hose to replace the brakepads.1.Measure: Brake pad wear limit aOut of specification → Replace the brakepad as a set.Brake pad wear limit:1 mm (0.04 in)2.Install: Brake pads Brake pad springNOTE:Always install new brake pads, brake pad shimand brake pad spring as a set.
