8 - 39CHAS Install the new bearings.NOTE:Install the outside bearing first.CAUTION:Do not strike the center race or balls of thebearing. Contact should be made only withthe outer race. Install the new oil seals.NOTE:When installing the oil seals, the “seal side” ofthe oil seal faces out.*****************************************************INSTALLING THE TIE RODS1.Install: Tie rods (left and right)NOTE:The tie rod which must be installed on the outside has grooves 1.T R..30 Nm (3.0 m • kg, 22 ft • lb)2.Adjust: Toe-inRefer to “ADJUSTING THE TOE-IN” inCHAPTER 3.STEERING SYSTEM
