9 - 10– +ELECIGNITION SYSTEMCORRECTSpark plug gap:0.6 ~ 0.7 mm (0.024 ~ 0.028 in)INCORRECTRepair or replace the spark plug.For CDN4.Ignition spark gap Disconnect the spark plug cap from thespark plug. Connect the dynamic spark tester 1 asshown.2 Spark plug cap3 Spark plug Turn the main switch to “ON”. Check the ignition spark gap. Crank the engine by pushing the starterswitch, and increase the spark gap until amisfiring occurs.Minimum spark gap:6.0 mm (0.24 in)MEETS SPECIFICATIONThe ignition system is not faulty.For Europe and OceaniaOUT OFSPECIFICATIONOR NO SPARK4.Ignition spark gap Disconnect the spark plug cap from thespark plug. Connect the ignition checker 1 as shown.2 Spark plug cap Turn the main switch to “ON”. Check the ignition spark gap a. Crank the engine by pushing the starterswitch, and increase the spark gap until amisfiring occurs.Minimum spark gap:6.0 mm (0.24 in)MEETS SPECIFICATIONThe ignition system is not faulty.5.Spark plug cap resistance Remove the spark plug cap. Connect the pocket tester (Ω × 1k) to thespark plug cap.
