4 - 54CHAS Attach the assembled ball joint remover/installer, new ball joint A, installer spacer 7and installer washer 8 to the front lower arm0.NOTE: Do not tap or damage the top of the ball joint. Installer spacer 7 must be aligned with theprojection on the head of the ball joint A. Remove the ball joint remover/installer. Apply lithium-soap base grease to the newball joint A. Install a new rubber boot and new circlip.NOTE:Always use a new ball joint set.***********************************************INSTALLING THE FRONT ARM1.Install: Front upper arm 1 Front lower arm 2NOTE:Be sure to position the bolts (upper and lower)so that the bolt head faces outward.T R..38 Nm (3.8 m • kg, 27 ft • lb)T R..32 Nm (3.2 m • kg, 23 ft • lb)FRONT ARMS AND FRONT SHOCK ABSORBERS
