5 - 11ENGCYLINDER HEAD COVERCHECKING THE TAPPET COVER1.Check: Tappet cover (intake) 1 Tappet cover (exhaust) 2 O-ring 3 NewINSTALLING THE CYLINDER HEAD COVER1.Apply: Sealant (Quick Gasket) 1(to the mating surfaces of the cylinder headand cylinder head cover)2.Install: Cylinder head cover Cable guides 1 Washers 2 Bolts3 Bolt: = 25 mm4 Bolt: = 40 mm5 Bolt: = 55 mm6 Bolt: = 115 mm7 Bolt: = 130 mmNOTE:Tighten the cylinder head cover bolts instages, using a crisscross pattern.Sealant (Quick Gasket) 1:P/N. ACC-11001-05-01Yamaha bond No. 1215:P/N. 90890-85505T R. .10 Nm (1.0 m • kg, 7.2 ft • lb)
