4 - 65CHASSWINGARM AND DRIVE CHAIN5.Lubricate: Drive chainRecommended lubricant:Engine oil or chain lubricantsuitable for O-ring chains6.Check: Drive sprocket Driven sprocketMore than 1/4 tooth a wear → Replace thedrive chain sprockets as a set.Bent teeth → Replace the drive chainsprockets as a set.b Correct1 Drive chain roller2 Drive chain sprocketINSTALLING THE SWINGARM1.Install: Bearings 1 Bushings 2(to swingarm)NOTE:Apply the lithium soap base grease on thebearing and bushing when installing.Installed depth of bearing:Left a: 0 mm (0 in)Right b: 4 mm (0.16 in)Installed depth of bushing c:8 mm (0.31 in)INSTALLING THE DRIVE SPROCKET1.Install: Drive sprocket 1 Lock washer 2 Nut 32.Bend the lock washer tab along a flat side ofthe nut.NewT R..70 Nm (7.0 m • kg, 50 ft • lb)
