5 - 47ENGCLUTCHREMOVING THE CLUTCH1.Remove: Clutch coverNOTE:Loosen each bolt 1/4 of a turn at a time, instages and in a crisscross pattern. After all ofthe bolts are fully loosened, remove them.2.Straighten the lock washer tab.3.Loosen: Clutch boss nut 1NOTE:While holding the clutch boss 2 with the clutchholding tool 3, loosen the clutch boss nut.Clutch holding tool:P/N. YM-91042, 90890-04086REMOVING THE PRIMARY DRIVE GEARAND BALANCER DRIVEN GEAR1.Straighten the lock washer tabs.2.Loosen: Primary drive gear nut 1 Balancer driven gear nut 2NOTE:Place an aluminum plate 3 between the teethof the balancer drive gear 4 and balancerdriven gear 5.
