8 - 13– +ELECELECTRIC STARTING SYSTEMEB803020TROUBLESHOOTINGProcedureCheck:1.Fuse2.Battery3.Starter motor4.Starter relay5.Main switch6.Engine stop switchIF THE STARTER MOTOR FAILS TO OPERATE:7.Start switch8.Neutral switch9.Clutch switch10.Wiring connection (the entire starting sys-tem)OTE: Remove the following part(s) before trouble-shooting:1)Seat2)Front fender3)Rear fender4)Exhaust pipe Use the following special tool(s) for trouble-shooting.Pocket tester:P/N. YU-03112, 90890-03112EB802011CONTINUITY1.FuseRefer to “CHECKING THE SWITCH”.NO CONTINUITYReplace the fuse.EB802012CORRECT2.Battery Check the battery condition.Refer to “CHECKING THE BATTERY” inCHAPTER 3.Open-circuit voltage:12.8 V or more at 20 °C (68 °F)*INCORRECT Clean the battery terminals. Recharge or replace the battery.
