Administrator’s Guide for Yealink VC110 Video Conferencing Endpoint1762. Select the desired language from the pull-down list of Language.To specify the language for the display device and the video conferencing phone via theremote control:1. Select Menu->Basic.2. Select the desired language from the pull-down list of Language.3. Press the Save soft key to accept the change.Date & TimeTime and date are displayed on the idle screen of the display device and the video conferencingphone. Time and date are synced automatically from the NTP server by default. The default NTPserver is cn.pool.ntp.org. The NTP server is configurable manually or obtained by DHCP viaDHCP Option 42. The phone will use the NTP server obtained by DHCP preferentially. If theendpoint cannot obtain the time and date from the NTP server, you need to manually configurethem. The time and date can use one of several different formats.Time ZoneA time zone is a region on Earth that has a uniform standard time. It is convenient for areas inclose commercial or other communication to keep the same time. When configuring theendpoint to obtain the time and date from the NTP server, you must set the time zone.Daylight Saving TimeDaylight Saving Time (DST) is the practice of temporary advancing clocks during thesummertime so that evenings have more daylight and mornings have less. Typically, clocks areadjusted forward one hour at the start of spring and backward in autumn. Many countries haveused DST at various times, details vary by location. DST can be adjusted automatically from thetime zone configuration. Typically, there is no need to change this setting.
