Administrator’s Guide for Yealink VC110 Video Conferencing Endpoint1827. Click Confirm to accept the change.To configure the time and date format via the remote control:1. Select Menu->Basic->Date & Time.2. Configure the desired values.3. Press the Save soft key to accept the change.The time and date displayed on the LCD screen of the display device and videoconferencing phone will change accordingly.Automatic Sleep TimeThe endpoint will enter the sleep mode automatically when it has been inactive for a period oftime (the default time is 10 minutes). When the endpoint is in sleep mode, it can still acceptincoming calls. The display device will prompt ”No Signal”, and the LCD screen of the videoconferencing phone prompts “Sleeping Press any key to resume”. You can press any key on theremote control or the video conferencing phone to wake the endpoint up. When receiving a call,the endpoint will be woken up automatically.You can change the automatic sleep time via the remote control or web user interface. You canalso press the sleep key on the remote control to make the endpoint sleep immediately.The automatic sleep time is described below:Parameter Description Configuration MethodAutomatic SleepTimeConfigures the inactive time (inminutes) before the endpoint entersleep mode.Default: 10 MinNote: During setup wizard, theautomatic sleep time feature isdisabled automatically. To protectthe display device, you shouldconfigure the automatic sleep timeimmediately.Remote ControlWeb User InterfaceTo configure the automatic sleep time via web user interface:1. Click on Setting->General.
