Administrator’s Guide for Yealink VC110 Video Conferencing Endpoint292 Check whether the endpoint has enabled the auto dialout mute feature.Why can’t I hear the other site clearly during a call? Ensure that the speaker volume of the far site is not set too low. Muffled audio reception from the far side may be caused by highly reverberant rooms.Speak in close proximity to the phone. Adjust the priority order for your audio codec if you have chosen a low-bandwidth audiocodec to be first. For more information, refer to Audio Codecs on page 150. Dust and debris may cause audio quality. Do not use any kind of liquid or aerosol cleaneron the phone. A soft, slightly damp cloth should be sufficient to clean the top surface ofthe phone if necessary.Why is the voice quality poor?Users may receive poor voice quality during a call, such as intermittent voice, low volume, echoor other noise. It is difficulty to diagnosis the root causes of the voice anomalies. The possiblereasons are: Users sit too far from or near to the microphone. The audio pickup device is moved frequently. Intermittent voice is probably caused by voice packet loss or jitter. Voice packet loss mayoccur due to network congestion. Jitter may occur due to information reorganization ofthe transmission or receiving equipment, such as, delay processing, retransmissionmechanism or buffer overflow. Noise devices, such as computers or fans, may make it difficult to hear each other's voicesclearly. Wires may also cause this problem. Replace the old with the new cables, and thenreconnect to check whether the new cables provide better connectivity.Why can’t I view the local video image? Check whether the local site camera is connected to the VC110 all-in-one unit correctly. Check whether camera is powered on, and the LED indicator illuminates green. Check whether the camera is selected for the current video input source. Check the screen layout to see whether the remote video image is shown in full size.Why can’t I view the menu? Check whether the Display1 port of VC110 all-in-one unit is connected to the HDMI porton the display device.
