Yealink VC110 Administrator's Manual

Also see for CPE80: User guide Quick start guide

Contents

Troubleshooting295 Configure some features need to take effect after a rebootYou can reboot the endpoint in the following ways: Select Menu->Advanced (default password: 0000) ->Reboot & Reset->Reboot, andthen press . Log into web user interface and click on Setting->Upgrade->Reboot, and then clickConfirm.Why does the endpoint fail to upgrade? Ensure that the firmware is different from the firmware currently in use. Ensure that the downloaded firmware applies to the endpoint. Ensure that the endpoint is powered on normally, and the network is available during theupgrade process. When upgrading firmware via web user interface, ensure that the web user interface is notrefreshed or closed during the upgrade process.