Administrator’s Guide for Yealink VC110 Video Conferencing Endpoint276MIB OID DescriptionFormat:MacVersion[*]ComVersion[*]For example,MacVersion[0.0.0.1]ComVersion[0.0.0.1]YEALINK-MIB 1.3.6.1.2.1.37459.2.1.11.0The command of the endpoint reboot.Format:snmpset -v 2c XXXX public 37459.2.1.11.0 srebootXXXX refers to the IP address of the endpoint.SNMP parameters on the endpoint are described below:Parameter Description Configuration MethodSNMP->ActiveEnables or disables SNMP feature onthe endpoint.Default: DisabledNote: If you change this parameter,the endpoint will reboot to make thechange take effect.Web User InterfacePortSpecifies the SNMP port.Valid Values: 1-65535Default: 161Note: If you change this parameter,the endpoint will reboot to make thechange take effect.Web User InterfaceTrusted AddressConfigures IP address(es) or domainname of the trusted SNMP server.Multiple IP addresses or domainnames should be separated byspaces.Note: If it is left blank, the endpointaccepts and handles GET requestsfrom any SNMP server.If you change this parameter, theendpoint will reboot to make thechange take effect.Web User InterfaceTo configure SNMP via web user interface:1. Click on Network->Advanced.
