Administrator’s Guide for Yealink VC110 Video Conferencing Endpoint42Connecting the VC110 Video Conferencing EndpointDo the following:1. Locate the DVI port on the back of the VC110 all-in-one unit, and connect it to the DVI portof the cable hub with the supplied DVI cable.2. Locate the Display1 port of the VC110 all-in-one unit, and connect it to the HDMI port onthe display device with the supplied HDMI cable (Make sure the display device is poweredon).3. Locate the Internet port on the cable hub, and connect it to the port on the in-line powerswitch/hub with the supplied 2m Ethernet cable.4. (Optional.) Locate the Audio In port of the cable hub, and do one of the following:- Connect it to the Audio Out port on the video conferencing phone with the 7.5mEthernet cable that labeled Audio In, and then connect the free end of the expansionmicrophone cables to MIC ports on the video conferencing phone.- Connect it to the Audio Out port of the VCM30 video conferencing microphone arraywith the 7.5m Ethernet cable labeled Audio In.5. (Optional.) Locate the PC port of the cable hub and connect it to the HDMI port on the PCwith the supplied HDMI-VGA direct cable for sharing content.6. Locate the DC19V port of the VC110 all-in-one unit, and connect it to an AC power outlet
