York LX SERIES Technical Manual

Also see for LX series: Owner's manual Technical guide Technical guide Technical guide Installation manual

Contents

HSW−...−AP/A SFesto HSW−...−AP/AS 0812b English 373 Function and applicationBy means of the path guide 3 and the linearguide 6 a movement in a vertical and horizontal direction is forced (y−z path). Springclamping elements 8 fitted to the end stops9 guarantee a high degree of repetitionaccuracy in positioning. Self−adjusting hydraulic shock absorbers 1 in the end positions cushion the movement. The end positions can be scanned with proximity switchesSME/SMT−8 The switching status of the proximity switches can be observed through theviewing window when the protective cover is fitted on.The stroke range for both end positions (receive and release positions) is setseparately depending on the installation position: via the adjusting screws for angle setting 4 via the shock absorbers/rubber buffers in the stop system 1.Handling module HSW has been designed for use in automated component assembly in handling and fitting systems.The HSW is particularly suitable for handling small parts at high speed,e.g. when inserting, turning over or joining.4 Transport and storageS Take the weight of the HSW into consideration.Depending on the size, the basic design can weigh up to 5.5 kg.S Consider the following recommendations regarding storage:storage duration: < 48 monthsstorage temperature: +20 °CFig.4