HSW−...−AP/A SFesto HSW−...−AP/AS 0812b English48Please noteFor HSW−...−AS with electric motor:Movement to a fixed stop creates impulsive loadings in the drive train. This cancause damage to the gears, for example.S Always use reduced energy during reference runs to the fixed stops(1/9 in Fig.1).The rubber buffers in the fixed stops are only for silencing.Please noteFor HSW−...−...W:S Please observe the warnings and instructions in the brief description forBAW−HSW.S Pressurize the add−on components.S If necessary, carry out a separate test run to check that the add−on components are functioning correctly.AttachmentcomponentsTestsWithout work load Check the correct assignment of the compressed airconnections Gripping speed Function of the proximity switchesWith load Check that the work load is gripped firmlyFig.22S Pressurize the drive in one of the following ways as desired: slow pressurization of one side simultaneous pressurization of both sides with subsequent exhausting ofone sidePlease noteThe swivel module DSM for HSW−...−AP may only be operated unmodified assupplied from the factory and with the protective cap (if present).