Zeiss Axio Examiner Operating Manual

START-UPAxio Examiner Installing standard components Carl ZeissM60-2-0003 e 05/2012 333.1.9 Attaching and removing thecondenser carrier(1) Attaching the condenser carrier• Unscrew the two hexagon socket screws(Figure 3-12/1) in the cover plate at the stand,and take off the cover plate.• Put the condenser carrier (Figure 3-12/2) on thestand, and fasten it using the two socket screws(Figure 3-12/1).(2) Removing the condenser carrier• Hold the condenser carrier (Figure 3-12/2) withone hand, and unscrew the two hexagonsocket screws (Figure 3-12/1).• Take off the condenser carrier and lay it downsafely.3.1.10 Installing the condenserTo replace the condenser, take off the stagecarrier first (see section 3.1.12).• Put the condenser (Figure 3-13/1) on thecondenser carrier. To do so, direct the stud atthe condenser bottom toward the slot(Figure 3-13/2).• Slide the condenser into the condenser carrieruntil it reaches its stop, and secure it using theclamping screw (Figure 3-13/3).Figure 3-12 Attaching & removing thecondenser carrierFigure 3-13 Putting on the condenser