OPERATION Axioskop 2 plusCarl Zeiss Operation and function controls Axioskop 2 mot plus3-14 B 40-075 e 02/01Key for fast stage lifting− When this key is activated, the stage is moved back to the focus position last stored.In the case of different specimen slide thickness, there is a risk of the specimen and/or theobjective being damaged during fast stage lifting. The procedure can then be stoppedimmediately by pressing the (fast stage lowering) key.On / Off key for transmitted light− When this key is activated, the transmitted light is switched on or off.☞ Transmitted light is always available when the microscope is switched on.Set key− Stores illumination and condenser settings and is used for programming.Binocular ergotube 6-25°/23The binocular ergotube 6-25°/23 allows theviewing angle to be changed continuously in therange between 6° and 25° by swivelling thebinocular component.− To set the most convenient viewing angle,swivel the binocular component (3-9/1)upwards or downwards.− The viewing height can be changed by turningthe entire binocular component around 360°(3-11).− The interpupillary distance can be changed byseparate adjustment of the two eyepiece tubes.Fig. 3-9 Binocular ergotube
