Axioskop 2 plus OPERATIONAxioskop 2 mot plus Switching on and basic settings Carl ZeissB 40-075 e 02/01 3-19Overview of function and programming modes:Function modes Programming modeautomatic manualStart • Switch onAxioskop 2 mot pluswith the on / off switch(3-1/27)(standard setting after eachswitch-on)• Keep key "transmitted lighton / off" (3-14/1) pressedand• Switch on theAxioskop 2 mot plus withon / off switch (3-1/27) andwait until beep is heardafter 3 s• Keep Set key (3-15/1) oninstrument rear pressed formore than 2 s until doublebeep is heardSettings − Light intensitydepending on objective(nosepiece) and techniquemodule (reflector turret)− Condenser turret positiondepending on objective(nosepiece) and techniquemodule (reflector turret)− Condenser front lensdepending on objective(nosepiece)− Aperture diaphragmopeningdepending on objective(nosepiece)− Transmitted-lightilluminationdepending on techniquemodule• Set the Axioskop 2 mot plusin the same way as theAxioskop 2 plus− Focus positionsdepending on objectives(parfocality)− Focusing speeds:10 stepsEnd • Switch off theAxioskop 2 mot plus withon / off switch (3-1/27)• Shortly press Set key(3-15/1) on instrument rearBoth function modes and the programming mode are described in detail on the following pages.
