Zeiss Axiovert 200 Operating Manual

Also see for Axiovert 135M: Operating manual Instructions for use

Contents

INTRODUCTIONCarl Zeiss Contents Axiovert 2000-4 B 40-080 e 03/01pageCHAPTER 2 START-UP.................................................................................................................. 2-52.1 Unpacking and installation of the microscope............................................................. 2-52.2 Attachment of binocular (photo) tube ......................................................................... 2-62.2.1 Inserting the eyepieces and the centering telescope.................................................... 2-62.2.2 Inserting the eyepiece reticle ....................................................................................... 2-72.3 Attachment of transmitted-light illumination ............................................................... 2-82.3.1 Attachment of carrier for transmitted-light illumination (100 W) .................................. 2-82.3.2 Attachment of carrier for transmitted-light illumination (30 W) .................................... 2-82.4 Screw in objectives ..................................................................................................... 2-92.5 Attachment of microscope stages ............................................................................. 2-102.5.1 Attachment of mechanical stage 130x85 R/L and mounting framefor mechanical stage (K)............................................................................................ 2-102.5.2 Attachment of scanning stage................................................................................... 2-102.5.3 Attachment of specimen stage 250x230, object guide and mounting framefor object guide (M) .................................................................................................. 2-112.5.4 Attachment of heating stage .................................................................................... 2-122.5.5 Attachment of gliding stage Z ................................................................................... 2-122.6 Attachment of condensers ........................................................................................ 2-132.6.1 Condensers for the Axiovert 200............................................................................... 2-132.6.2 Condensers from the Axioplan 2 imaging / Axioskop 2 product line ........................... 2-132.6.3 Changing the DIC prism in the condenser turret ........................................................ 2-142.7 Reflector turret ......................................................................................................... 2-152.7.1 Attachment of reflector turret................................................................................... 2-152.7.2 Equipment of reflector turret .................................................................................... 2-152.7.3 Changing the filter set in the FL reflector module ...................................................... 2-162.7.4 Changing the beam splitter in the FL reflector module ............................................... 2-162.8 Connection to the line .............................................................................................. 2-182.9 Interfaces of the Axiovert 200 M ............................................................................... 2-192.10 Switch microscope and ebq 100 dc power supply on and off..................................... 2-192.11 Equipotential bonding terminals ................................................................................ 2-192.12 HAL 100 halogen illuminator..................................................................................... 2-202.12.1 Change / attachment of the HAL 100 halogen lamp .................................................. 2-202.12.2 Coarse alignment of halogen illuminator ................................................................... 2-212.12.3 Attachment of halogen illuminator............................................................................ 2-212.12.4 Fine alignment of halogen illuminator ....................................................................... 2-22