Zeiss Axiovert 200 Operating Manual

Also see for Axiovert 135M: Operating manual Instructions for use

Contents

OPERATIONCarl Zeiss Axiovert 200 M Axiovert 2003-24 B 40-080 e 03/01Setting of nosepiece equipment• Press one of the two OBJECTIVE keys.Change to nosepiece programming is made, and SET Objective is displayed in the upper line of the LCDdisplay. The set nosepiece position, the magnification and the contrasting technique of the objective aredisplayed in the lower LCD line.• Activation of the toggle switch on the front of the stand permits a list of objectives to be scrolledthrough upwards or downwards.• If the correct objective for the relevant nosepiece position appears in the LCD display, the nextnosepiece position can be swung in by pressing one of the two OBJECTIVE keys and the relevantobjective can be assigned.• Repeat the procedure for all nosepiece positions. Then change to the next programming item or exitthe Set mode.Setting of reflector turret equipment• Press one of the two REFLECTOR keys.Change to reflector turret programming is made, and SET Reflector is displayed in the upper line of theLCD display. The set reflector turret position and the selected filter set are shown in the lower LCD line.• Activation of the toggle switch on the front of the stand permits a list of filter sets to be scrolledthrough upwards or downwards.• If the correct filter set for the relevant reflector turret position appears in the LCD display, the nextturret position can be swung in by pressing one of the two REFLECTOR keys and the relevant filterset can be assigned.• Repeat the procedure for all reflector turret positions. Then change to the next programming item orexit the Set mode.