13Shutdown1. Save your images in Users folder in the D drive;2. Close Zen Black;3. A window to save any unsaved images/profiles should appear if there are any, DO NOToverwrite other users’ experiment profiles!4. A Laser Off window appear:a. If someone is using the system in the next 4 hours leave the Argon laser inStandby mode and turn all other lasers off;b. Otherwise turn all lasers Off.5. If turned Off it will take the Argon Laser at least 5 minutes to cool (fans turn off);6. Shutdown the computer and then wait for the Argon Laser fans to turn off;7. AFTER the Argon Laser cools down:a. Turn off the Components Switch;b. Turn off the Systems/PC Switch;c. Turn off the Main Switch;8. Put the dust cover back on.ATTENTIONTurning the switches off before the Argon Laser module is done cooling can damage thelaser!