Canon NP6330 manuals
NP6330
Table of contents
- system configuration
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- I. FEATURES
- II. SPECIFICATIONS
- Performance
- B. Paper Deck Pedestal-M1
- III. NAMES OF PARTS
- B. Cross Section
- Paper Deck Pedestal-M1
- IV. OPERATION
- B. Control Panel (Inch)
- C. User Mode
- Adjustment/Cleaning
- V. ROUTINE MAINTENANCE BY THE USER
- VI. IMAGE FORMATION
- B. Static Latent Image Formation Block
- D. Primary Charging (step 2)
- F. Development (step 4)
- G. Transfer (step 5)
- H. Separation (step 6)
- I. Fixing (step 7)
- VII. AUXILIARY PROCESS
- I. BASIC OPERATION
- B. Outline of the Electrical Circuitry
- C. Basic Sequence
- D. Controlling the Main Motor
- E. Inputs to the DC Controller
- Input to the DC Controller (2/5)
- Input to the DC Controller (3/5)
- A. Varying the Reproduction Ratio
- II. LENS DRIVE SYSTEM
- Lens Motor Drive Circuit
- Focusing
- III. SCANNER DRIVE MECHANISM
- Scanning Motor Control Circuit
- Relationship between Scanner Sensor and Signals
- Movements (page separation mode, 2 copies)
- IV. OTHERS
- Operation
- Identifying the Size of Originals
- Identifying the Size of Originals by the Document Feeder
- DISASSEMBLY AND ASSEMBLY
- Outline of the Scanner Drive Cable
- Removing the Scanner Drive Cable
- Routing the Scanner Cable
- B. Lens Drive Assembly
- Attaching the Lens Drive Belt
- Removing the Lens hood
- I. PROCESSES
- C. Controlling the Scanner Lamp
- Turning On and Off the Scanning Lamp
- Transfer Corona Current and the Grid Bias
- Controlling the Primary/Transfer Corona Current
- Corona Current at a Specific Level
- Turning On and Off the Grid Bias
- E. Controlling the Static Eliminator Bias/Fixing Roller Bias
- Turning ON/OFF the Static Eliminator Bias/Fixing Bias
- A. Outline
- B. Detecting the Level of Toner and Controlling the Supply
- C. Stopping the Hopper Motor in Response to a Rotation Error
- III. DISASSEMBLY AND ASSEMBLY
- Orientation of the Scanning Lamp
- Removing the Thermal Fuse
- B. Blank Exposure Lamp Assembly
- Removing the Blank Exposure Lamp
- Removing the Blank Shutter Solenoid
- Adjusting the Position of the Blank Shutter Solenoid
- Removing the Blank Shutter Motor
- C. Drum Unit
- Cleaning
- D. Charging Assembly
- Removing the Transfer Charging Assembly
- Stringing the Guide Wire
- E. Developing System
- Removing the Blade
- Installing the Magnetic Seal and the Blade
- Installing the Electrode Positioning Plate
- Table Of Contents
- I. PICK-UP/FEEDING SYSTEM
- II. PICK-UP FROM THE CASSETTE
- Sequence of Pick-Up Operations
- B. Movement of the Cassette Lifter
- C. Identifying the Size of Copy Paper
- Markings on the Width Guide Rail
- Paper Size
- Registering Paper Width Basic Values
- III. PICK-UP FROM THE MULTIFEEDER
- Identifying the Size of Paper on the Multifeeder
- Sequence of Multifeeder Pick-Up Operation
- IV. CONTROLLING THE REGISTRATION CLUTCH
- V. TWO-SIDED COPYING
- b. lower feeding assembly
- c. horizontal registration
- vi. detecting jams
- vii. disassembly and assembly
- a. pick-up assembly
- Separation Roller
- Releasing the Lifter
- B. Multifeeder Assembly
- Adjusting the Pressure on the Separation Pad
- Adjusting the Paper Guide Plate Cam (multifeeder assembly)
- C. Registration Roller Assembly
- D. Feeding Assembly
- Removing the Feeding Belt
- Removing the Feeding Fan
- E. Lower Feeding Assembly
- Attaching the Lower Feeding Assembly
- Removing the Set-Back Roller
- Removing the Lower Feeder Outlet Roller
- Removing the Lower Feeder Inlet Roller
- I. OPERATION
- II. CONTROLLING THE FIXING TEMPERATURE
- Outline
- Controlling the Control Temperature
- C. Protection Mechanism
- D. Driving the Cleaning Belt
- III. DELIVERY ASSEMBLY
- B. Controlling the Delivery Motor
- IV. DISASSEMBLY AND ASSEMBLY
- Table Of Contents
- II. POWER SUPPLY
- B. Protection Mechanisms of the Power Supply Circuit
- III. ERROR DETECTION CIRCUIT
- B. Scanning Lamp Error Activation Detection Circuit
- A. Externals
- Remove the left inside cover
- Remove the right inside cover
- B. Control Panel
- C. Copyboard Cover
- E. Main Motor Assembly
- F. Mirror Guide Assembly
- G. Main Drive Assembly
- Attaching the Drive Belt
- H. Cleaning Belt Drive Assembly
- I. DC Controller PCB
- J DC Power Supply PCB
- Table Of Contents
- A. Outline of Electrical Circuit
- II. INPUTS TO AND OUTPUTS FROM PEDESTAL CONTROLLER
- B. Inputs to and Outputs from Pedestal Controller
- Inputs and outputs (2/2)
- III. PEDESTAL MOTOR CONTROL CIRCUIT
- IV. PAPER DECK UNIT
- B. Pick-Up/Feeding Operation
- C. Lifter Operation
- Lifting Operation
- D. Detecting Paper in the Deck
- vi. disassembly and assembly
- b. pedestal motor drive assembly
- c. paper deck
- d. pick-up system
- Removing the Pick-Up Roller
- Removing the Feeding Roller
- Removing the Separation Roller
- Adjusting the Pressure of the Separation Roller
- I. SELECTING THE SITE
- II. UNPACKING AND INSTALLATION
- B. Supplying Toner
- C. Stirring the Toner
- D. Installing the Drum Unit
- E. Checking Images and Operations
- RELOCATING THE COPIER
- I. PERIODICALLY REPLACED PARTS
- II. CONSUMABLES AND DURABLES
- B. Paper Deck Pedestal
- SCHEDULED SERVICING
- PERIODICALLY SERVICED PARTS
- Table Of Contents
- I. MAINTENANCE AND INSPECTION
- B. Points to Note for Scheduled Servicing
- A. Adjusting the Images
- Adjusting the Leading Edge Non-Image Width [3] No. 306
- Adjusting the Trailing Edge Non Image Width [3] No. 307
- Adjusting the Left-Right Registration
- Adjusting the Image Left-Right Margin [3] No. 308
- AE Adjustments
- Adjusting the Developing Bias DC Component [3] No. 302
- Registration Paper Edge Sensor Position [3] No. 324
- b. exposure system
- c. image formation system
- Cable
- Routing the Charging Wire
- Adjusting the Height of the Charging Wire
- Position of the Developing Assembly Magnetic Seal
- Orientation of the Pick-Up Roller
- Orientation of the Feeding Roller
- Solenoid (pick-up assembly SL1, SL2)
- Plate Cam (multifeeder assembly)
- Separation Pad (multifeeder assembly)
- Horizontal Registration Solenoid
- Points to Note When Installing the Fixing Heater
- Adjusting the Nip (tightening the pressure adjusting nut)
- Position of the Fixing Assembly Paper Guide
- Multifeeder Paper Width Basic Setting [4]
- paper deck pedestal
- a. making initial checks
- b. image fault samples
- c. troubleshooting faulty images
- the copy is solid black
- a. troubleshooting malfunctions
- E053
- E060
- E202
- E204
- E224
- E712
- E800
- AC power is absent
- DC power is absent
- The blank shutter fails to move
- Pick-up fails. (cassette)
- Pick-up fails. (multifeeder)
- The scanner fails to move forward/in reverse
- The registration roller fails to rotate
- The scanning lamp fails to turn on
- The pre-exposure lamp fails to turn on
- The lens fails to move
- The fixing heater fails to operate
- The total copy counter fails to operate
- The Add Paper indicator fails to turn off
- The Add Toner indicator fails to turn off
- B. Troubleshooting Malfunctions in the Pedestal
- Pick-up fails. (pedestal)
- The Add Paper indicator fails to turn off. (pedestal)
- TROUBLESHOOTING FEEDING FAULTS
- Pick-up assembly
- Separation/feeding assembly
- Fixing/delivery assembly
- Lower feeding assembly
- B. Troubleshooting Feeding Faults
- FUNCTIONS OF THE ELECTRICAL PARTS
- A. Sensors
- B. Switches, clutches, and solenoids
- C. Heaters, lamps, and motors
- d. pcbs
- E. Paper deck pedestal-M1
- Emitting Diodes, and Check pins by PCB
- Lamp Regulator PCB
- Motor driver 1 PCB
- VII. SERVICE MODE
- B. Using Service Mode
- C. Using Adjustment Mode and Optional Setting mode
- D. Control/Display Mode [1]
- F. Adjustment Mode [3]
- G. Function Mode [4]
- H. Optional Settings Mode [5]
- I. Counter Mode [6]
- VIII. SELF DIAGNOSIS
- B. Pedestal Self Diagnosis
- C. RDF/ADF Self Diagnosis
- D. Sorter Self Diagnosis
- A. GENERAL TIMING CHART
NP6330
Table of contents
- system configuration
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- I. FEATURES
- II. SPECIFICATIONS
- Performance
- B. Paper Deck Pedestal-M1
- III. NAMES OF PARTS
- B. Cross Section
- Paper Deck Pedestal-M1
- IV. OPERATION
- B. Control Panel (Inch)
- C. User Mode
- Adjustment/Cleaning
- V. ROUTINE MAINTENANCE BY THE USER
- VI. IMAGE FORMATION
- B. Static Latent Image Formation Block
- D. Primary Charging (step 2)
- F. Development (step 4)
- G. Transfer (step 5)
- H. Separation (step 6)
- I. Fixing (step 7)
- VII. AUXILIARY PROCESS
- I. BASIC OPERATION
- B. Outline of the Electrical Circuitry
- C. Basic Sequence
- D. Controlling the Main Motor
- E. Inputs to the DC Controller
- Input to the DC Controller (2/5)
- Input to the DC Controller (3/5)
- II. LENS DRIVE SYSTEM
- Lens Motor Drive Circuit
- Focusing
- Outline
- Scanning Motor Control Circuit
- Relationship between Scanner Sensor and Signals
- Movements (page separation mode, 2 copies)
- IV. OTHERS
- Operation
- Identifying the Size of Originals
- Identifying the Size of Originals by the Document Feeder
- DISASSEMBLY AND ASSEMBLY
- Outline of the Scanner Drive Cable
- Removing the Scanner Drive Cable
- Routing the Scanner Cable
- B. Lens Drive Assembly
- Attaching the Lens Drive Belt
- Removing the Lens hood
- I. PROCESSES
- C. Controlling the Scanner Lamp
- Turning On and Off the Scanning Lamp
- Transfer Corona Current and the Grid Bias
- Controlling the Primary/Transfer Corona Current
- Corona Current at a Specific Level
- Turning On and Off the Grid Bias
- E. Controlling the Static Eliminator Bias/Fixing Roller Bias
- Turning ON/OFF the Static Eliminator Bias/Fixing Bias
- A. Outline
- B. Detecting the Level of Toner and Controlling the Supply
- C. Stopping the Hopper Motor in Response to a Rotation Error
- III. DISASSEMBLY AND ASSEMBLY
- Orientation of the Scanning Lamp
- Removing the Thermal Fuse
- B. Blank Exposure Lamp Assembly
- Removing the Blank Exposure Lamp
- Removing the Blank Shutter Solenoid
- Adjusting the Position of the Blank Shutter Solenoid
- Removing the Blank Shutter Motor
- C. Drum Unit
- Cleaning
- D. Charging Assembly
- Removing the Transfer Charging Assembly
- Stringing the Guide Wire
- E. Developing System
- Removing the Blade
- Installing the Magnetic Seal and the Blade
- Installing the Electrode Positioning Plate
- Table Of Contents
- I. PICK-UP/FEEDING SYSTEM
- II. PICK-UP FROM THE CASSETTE
- Sequence of Pick-Up Operations
- B. Movement of the Cassette Lifter
- C. Identifying the Size of Copy Paper
- Markings on the Width Guide Rail
- Paper Size
- Registering Paper Width Basic Values
- III. PICK-UP FROM THE MULTIFEEDER
- Identifying the Size of Paper on the Multifeeder
- Sequence of Multifeeder Pick-Up Operation
- IV. CONTROLLING THE REGISTRATION CLUTCH
- V. TWO-SIDED COPYING
- b. lower feeding assembly
- c. horizontal registration
- vi. detecting jams
- vii. disassembly and assembly
- a. pick-up assembly
- Separation Roller
- Releasing the Lifter
- B. Multifeeder Assembly
- Adjusting the Pressure on the Separation Pad
- Adjusting the Paper Guide Plate Cam (multifeeder assembly)
- C. Registration Roller Assembly
- D. Feeding Assembly
- Removing the Feeding Belt
- Removing the Feeding Fan
- E. Lower Feeding Assembly
- Attaching the Lower Feeding Assembly
- Removing the Set-Back Roller
- Removing the Lower Feeder Outlet Roller
- Removing the Lower Feeder Inlet Roller
- I. OPERATION
- II. CONTROLLING THE FIXING TEMPERATURE
- Controlling the Control Temperature
- C. Protection Mechanism
- D. Driving the Cleaning Belt
- III. DELIVERY ASSEMBLY
- B. Controlling the Delivery Motor
- IV. DISASSEMBLY AND ASSEMBLY
- Table Of Contents
- II. POWER SUPPLY
- B. Protection Mechanisms of the Power Supply Circuit
- III. ERROR DETECTION CIRCUIT
- B. Scanning Lamp Error Activation Detection Circuit
- A. Externals
- Remove the left inside cover
- Remove the right inside cover
- B. Control Panel
- C. Copyboard Cover
- F. Mirror Guide Assembly
- G. Main Drive Assembly
- Attaching the Drive Belt
- H. Cleaning Belt Drive Assembly
- I. DC Controller PCB
- J DC Power Supply PCB
- Table Of Contents
- II. INPUTS TO AND OUTPUTS FROM PEDESTAL CONTROLLER
- B. Inputs to and Outputs from Pedestal Controller
- Inputs and outputs (2/2)
- III. PEDESTAL MOTOR CONTROL CIRCUIT
- IV. PAPER DECK UNIT
- B. Pick-Up/Feeding Operation
- C. Lifter Operation
- Lifting Operation
- D. Detecting Paper in the Deck
- vi. disassembly and assembly
- b. pedestal motor drive assembly
- c. paper deck
- d. pick-up system
- Removing the Pick-Up Roller
- Removing the Feeding Roller
- Removing the Separation Roller
- Adjusting the Pressure of the Separation Roller
- I. SELECTING THE SITE
- II. UNPACKING AND INSTALLATION
- C. Stirring the Toner
- D. Installing the Drum Unit
- E. Checking Images and Operations
- RELOCATING THE COPIER
- A. Copier
- B. Paper Deck Pedestal
- SCHEDULED SERVICING
- PERIODICALLY SERVICED PARTS
- Table Of Contents
- I. MAINTENANCE AND INSPECTION
- B. Points to Note for Scheduled Servicing
- A. Adjusting the Images
- Adjusting the Leading Edge Non-Image Width [3] No. 306
- Adjusting the Trailing Edge Non Image Width [3] No. 307
- Adjusting the Left-Right Registration
- Adjusting the Image Left-Right Margin [3] No. 308
- AE Adjustments
- Adjusting the Developing Bias DC Component [3] No. 302
- Registration Paper Edge Sensor Position [3] No. 324
- b. exposure system
- c. image formation system
- Cable
- Routing the Charging Wire
- Position of the Developing Assembly Magnetic Seal
- D. Pick-Up / Feeding System
- Orientation of the Feeding Roller
- Solenoid (pick-up assembly SL1, SL2)
- Plate Cam (multifeeder assembly)
- Separation Pad (multifeeder assembly)
- Horizontal Registration Solenoid
- E. Fixing System
- Adjusting the Nip (tightening the pressure adjusting nut)
- Position of the Fixing Assembly Paper Guide
- F. Electrical System
- a. making initial checks
- b. image fault samples
- c. troubleshooting faulty images
- a. troubleshooting malfunctions
- E053
- E060
- E204
- E224
- E712
- E800
- The blank shutter fails to move
- Pick-up fails. (cassette)
- Pick-up fails. (multifeeder)
- The scanner fails to move forward/in reverse
- The registration roller fails to rotate
- The scanning lamp fails to turn on
- The pre-exposure lamp fails to turn on
- The fixing heater fails to operate
- The total copy counter fails to operate
- The Add Paper indicator fails to turn off
- B. Troubleshooting Malfunctions in the Pedestal
- Pick-up fails. (pedestal)
- The Add Paper indicator fails to turn off. (pedestal)
- TROUBLESHOOTING FEEDING FAULTS
- Pick-up assembly
- Separation/feeding assembly
- Fixing/delivery assembly
- Lower feeding assembly
- B. Troubleshooting Feeding Faults
- FUNCTIONS OF THE ELECTRICAL PARTS
- A. Sensors
- B. Switches, clutches, and solenoids
- C. Heaters, lamps, and motors
- d. pcbs
- E. Paper deck pedestal-M1
- Emitting Diodes, and Check pins by PCB
- Lamp Regulator PCB
- Motor driver 1 PCB
- B. Using Service Mode
- C. Using Adjustment Mode and Optional Setting mode
- D. Control/Display Mode [1]
- F. Adjustment Mode [3]
- G. Function Mode [4]
- H. Optional Settings Mode [5]
- I. Counter Mode [6]
- B. Pedestal Self Diagnosis
- C. RDF/ADF Self Diagnosis
- D. Sorter Self Diagnosis
- A. GENERAL TIMING CHART
manualsdatabase
Your AI-powered manual search engine