Manuals database logo
manualsdatabase
Your AI-powered manual search engine

ABB i-bus KNX manuals

i-bus KNX first page preview

i-bus KNX

Brand: ABB | Category: Controller
Table of contents
i-bus KNX first page preview

i-bus KNX

Brand: ABB | Category: Controller
Table of contents
  1. Table Of Contents
  2. Table Of Contents
  3. General
  4. Structure of the product manual
  5. Product and functional overview
  6. Device technology
  7. Lamp load output
  8. Circuit diagram
  9. Connection example
  10. Dimension drawing
  11. Ballast calculation
  12. AC1, AC3, AX, C-Load specifications
  13. Measurement methods
  14. Assembly and installation
  15. Commissioning
  16. Conversion
  17. Procedure
  18. Copying and exchanging parameter settings
  19. Dialog Copy/exchange channels
  20. Parameters
  21. Parameter window General
  22. Parameter window Metering (Wh)
  23. Parameter window Function
  24. Parameter window Meter reading total (Wh)
  25. Parameter window Active power total
  26. Parameter window Frequency
  27. Parameter window Load control master
  28. Parameter window A: General
  29. Parameter window A: Function
  30. Parameter window A: Time
  31. Parameter window A: Scenes 1...6
  32. Parameter window A: Scenes 7...12
  33. Parameter window A: Logic
  34. Parameter window A: Safety
  35. Parameter window A: Metering (Wh)
  36. Parameter window A: Instrument and power values
  37. Parameter window A: Monitor active power
  38. Parameter window A: Monitor current
  39. Parameter window A: Monitor voltage
  40. Parameter window A: Load control slave
  41. Communication objects
  42. Short overview of the communication objects
  43. Communication objects General
  44. Communication objects Load control master
  45. Communication objects Meter total
  46. Communication objects Active power total
  47. Communication objects Frequency
  48. Communication objects Output A: Switch
  49. Communication objects A: Meter
  50. Communication objects A: Intermediate meter
  51. Communication objects A: Load control slave
  52. Communications objects A: Instrument and power values
  53. Planning and application
  54. Function chart
  55. Meter reading
  56. Instruments and power values
  57. Load control
  58. Function Time
  59. Staircase lighting
  60. Switching ON and OFF delay
  61. Flashing
  62. Function Safety
  63. Reaction on bus voltage failure
  64. A Appendix
  65. A.2 Code table Scene (8 bit), DPT 18.001
  66. A.3 Code table Receive load shedding stage (no. 10), DPT 236.001
  67. A.5 Code table Status byte Output A (No. 62), NON DPT
  68. A.6 Ordering Information
i-bus KNX first page preview

i-bus KNX

Brand: ABB | Category: Thermostat
i-bus KNX first page preview

i-bus KNX

Brand: ABB | Category: Control Unit
Table of contents
  1. Table Of Contents
  2. Table Of Contents
  3. General
  4. Using the product manual
  5. Notes
  6. Product and functional overview
  7. Emergency lighting tests
  8. General information on DALI and standards
  9. Device technology
  10. Technical data
  11. Connection diagram
  12. Dimension drawing
  13. Mounting and installation
  14. Description of inputs and outputs
  15. Manual operation
  16. Display elements
  17. Commissioning
  18. Overview
  19. Parameters
  20. General parameter window
  21. DALI output X parameter window
  22. X Output parameter window
  23. X Output: State parameter window
  24. X Output: Fault parameter window
  25. X Output: Functions (Turn off brightness/Burn-in/Slave offset/Partial failure parameter window
  26. X template group x/ballast x parameter window
  27. X Status template (group x/ballast x) parameter window
  28. X Fault template (group x/ballast x) parameter window
  29. X Functions template (group x/ballast x) (Forced operation/Block/Burn-in/Partial failure parameter window
  30. X Slave template (group x/ballast x) parameter window
  31. X Staircase lighting template (group x/ballast x) parameter window
  32. X groups or X ballasts parameter window
  33. X groups/Group x or X ballasts/Ballast x / status parameter window
  34. X groups/Group x or X ballasts/Ballast x / fault parameter window
  35. X groups/Group x or X ballasts//ballast x / functions (Forced operation/Block/Burn-in Partial failure) parameter window
  36. X groups/Group x or X ballasts/Ballast x / slave parameter window
  37. X groups/Group x or X ballasts/Ballast x / staircase lighting parameter window
  38. X lighting converter parameter window
  39. X lighting converter/Emergency light template parameter window
  40. X lighting converter/Emergency light x parameter window
  41. X scenes parameter window
  42. X scenes/Scene x parameter window
  43. Group objects
  44. Summary of group objects
  45. Group objects General
  46. Output A group objects
  47. Group x/Ballast x group objects
  48. Lighting converter x group objects
  49. Planning and application
  50. Lamp and ballast monitoring
  51. Exchange of DALI devices
  52. Function circuit diagrams and priorities
  53. DALI dimming curve
  54. KNX (linear) curve
  55. Time sequences in the gateway
  56. Timed progression of the staircase lighting function
  57. Appendix
  58. Fault addressed "Request" (no. 21) code table
  59. Fault addressed "Feedback" (no. 21) code table
  60. Scope of delivery
  61. Ordering details
i-bus KNX first page preview

i-bus KNX

Brand: ABB | Category: Controller
Table of contents
  1. Table Of Contents
  2. Table Of Contents
  3. General
  4. Using the product manual
  5. Notes
  6. Product and functional overview
  7. DALI principles for the DLR/S
  8. DALI group control
  9. Device technology
  10. DLR/S 8.16.1M
  11. Connection diagram DLR/S 8.16.1M
  12. Dimensional drawing DLR/S 8.16.1M
  13. Light Sensor LF/U 2.1
  14. Connection diagram LF/U 2.1
  15. Dimensional drawing LF/U 2.1
  16. Polar diagram LF/U 2.1
  17. Mounting and installation
  18. Description of the DALI output
  19. Display elements
  20. Operating controls
  21. Commissioning
  22. Overview
  23. Conversion
  24. Conversion procedure
  25. Copying and exchanging parameter settings
  26. Procedure for copy and exchange
  27. Functional overview
  28. Overlapping lighting groups
  29. Parameter
  30. Parameter window General
  31. Light sensor parameter window
  32. Parameter window Central
  33. Parameter window Status - Central
  34. Parameter window Gx Group
  35. Parameter window - Gx Status
  36. Parameter window - Gx Fault
  37. Parameter window - Gx Functions
  38. Parameter window - Gx Staircase lighting
  39. Parameter window - Gx Light controller
  40. Parameter window - Gx Control Operating
  41. Parameter window - Gx Slave
  42. Parameter window Scenes
  43. Parameter window Scene x
  44. Communication objects
  45. Summary of communication objects
  46. Communication objects General
  47. Communication objects DALI output
  48. Communication objects Group x
  49. Communication objects Scene x/y
  50. Communications object Light control
  51. Communication objects Slave function
  52. Communication objects Staircase lighting function
  53. Planning and application
  54. Function diagram
  55. Monitoring of lamps and ballasts
  56. Exchange of DALI devices
  57. Effect of ageing on lighting equipment
  58. Burning-in of lighting equipment
  59. Control telegram and status with a communication object
  60. Staircase lighting
  61. Staircase lighting with Light control function
  62. Constant light control
  63. Changing the setpoint
  64. Deactivation of constant light control
  65. Follow-up time of the inactive light control
  66. Brightness detection function
  67. Scene
  68. Slave
  69. Slave with offset function
  70. DALI dimming curve
  71. Characteristic adjustment of the linear lighting curve
  72. Characteristic adjustment of phys-min dimming value
  73. A Appendix
  74. A.2 Code table Diagnostics High byte (no. 6)
  75. A.3 Code table Request diagnostics (no. 7)
  76. A.4 Table of fading times Fade Time (no. 8)
  77. A.5 Code table Status sensors (no. 9)
  78. A.6 Code table Fault group/device code (no. 19)
  79. A.7 Code table 8 bit scene (no. 212)
  80. A.8 Further information about DALI
  81. A.9 Scope of delivery
  82. A.10 Order details
  83. A.11 DALI equipment
i-bus KNX first page preview

i-bus KNX

Brand: ABB | Category: Thermostat
i-bus KNX first page preview

i-bus KNX

Brand: ABB | Category: Control Unit
Table of contents
  1. Table Of Contents
  2. Table Of Contents
  3. Table Of Contents
  4. General
  5. Notes
  6. Product and functional overview
  7. Functional overview
  8. Device technology
  9. Valve outputs (thermoelectric, PWM)
  10. Resolution, accuracy and tolerances
  11. Fan, rated current 6 A
  12. Fan, lamp load 6 A
  13. Output, rated current 16 A
  14. Output, lamp load 16 A
  15. Connection diagram (motor-driven, 3-point)
  16. Dimension drawing
  17. Fan Coil Actuator FCA/S 1.1.2.2, PWM, MDRC
  18. Output, rated current 20 AX
  19. Output, lamp load 20 AX
  20. Connection diagram (thermoelectric, PWM)
  21. Fan Coil Actuator FCA/S 1.2.1.2, 0-10V, MDRC
  22. Outputs, valve V1/2, analog
  23. Connection diagram
  24. Fan Coil Actuator FCA/S 1.2.2.2, 0-10V, MDRC
  25. Mounting and installation
  26. Manual operation
  27. Display elements
  28. Operating controls
  29. Commissioning
  30. Functions of the inputs
  31. Output functions
  32. Parameters
  33. Parameter window General – Settings
  34. Parameter window Manual operation – Settings
  35. Parameter window Outputs A...H
  36. Description of the Fan Coil operating modes with valve drive, thermoelectric (PWM)
  37. Description of the Fan Coil operation modes with valve drive motor-driven (3-point) and analog
  38. Parameter window A: Output (Valve drive, thermoelectric (PWM))
  39. Parameter window AB: Output (valve drive, motor-driven (3-point))
  40. Parameter window A: Output (valve drive, analog (0...10 V))
  41. Parameter window Function
  42. Parameter window Security
  43. Parameter window Characteristic curve
  44. Parameter window Output B, C, D
  45. Parameter window Enable output E...H
  46. Parameter window E, F, G: Fan (Multi-level)
  47. Parameter window Status messages (Multi-level)
  48. Parameter window Thresholds (Multi-level)
  49. Parameter window Automatic control (Multi-level)
  50. Parameter window Direct operation (Multi-level)
  51. Parameter window Startup/Run-on
  52. Parameter window E, F, G: Fan (Two-level)
  53. Parameter window E, F, G: Fan (One-level)
  54. Parameter window Status messages (single speed)
  55. Parameter window Threshold (One-level)
  56. Parameter window Automatic control (One-level)
  57. Parameter window E, F, G: Output (switch actuators)
  58. Parameter window H: Output
  59. Parameter window Time
  60. Parameter window Inputs a...c
  61. Parameter window a: Switch sensor
  62. Parameter
 Distinction between long and short operation – No
  63. Parameter Distinction between long and short operation – Yes
  64. Parameter window a: Value/forced operation
  65. Parameter window a: PT100, PT1000 and KTY
  66. Parameter options for KTY
  67. Line fault compensation Via cable length
  68. Line fault compensation Via cable resistance
  69. Parameter window a: Threshold 1
  70. Parameter window a: Threshold 1 Output
  71. Communication objects
  72. Communication objects General
  73. Communication objects Valve drive, thermoelectric (PWM) and motor-driven (3-point)
  74. Communication objects Fan E, F, G
  75. Communication objects Fan One-level
  76. Communication objects Switch actuators E, F, G
  77. Communication objects Output H
  78. Communication objects Inputs a...c
  79. Communication objects Switch sensor
  80. Communication objects Value/forced operation
  81. Communication objects Temperature sensor
  82. Communication objects Heating/Cooling
  83. Planning and application
  84. Fan output
  85. Fan with changeover switch
  86. Direct operation
  87. Speed switching logic
  88. Fan operation functional diagram
  89. Switch output
  90. Time function
  91. Valve drives, valves and controller
  92. Control types
  93. Pulse width modulation (PWM)
  94. Pulse width modulation – calculation
  95. Reaction on bus voltage failure, recovery, download and ETS reset
  96. ETS reset
  97. Priorities
  98. A Appendix
  99. A.2 Status byte General
  100. A.3 Status byte outputs A, B, C, D
  101. A.4 Status byte fan
  102. A.5 Ordering details
  103. A.6 Notes
i-bus KNX first page preview

i-bus KNX

Brand: ABB | Category: Controller
Table of contents
  1. Table Of Contents
  2. Table Of Contents
  3. General
  4. Using the product manual
  5. Notes
  6. Product and functional overview
  7. DALI principles for the DLR/A
  8. DALI group control
  9. Device technology
  10. DLR/A 4.8.1.1
  11. Connection schematic DLR/A 4.8.1.1
  12. Dimensional drawing DLR/A 4.8.1.1
  13. Light Sensor LF/U 2.1
  14. Connection schematic LF/U 2.1
  15. Dimensional drawing LF/U 2.1
  16. Polar diagram LF/U 2.1
  17. Assembly and installation
  18. Description of the DALI output
  19. Display elements
  20. Operators
  21. Commissioning
  22. Overview
  23. Conversion
  24. Conversion procedure
  25. Copying and exchanging parameter settings
  26. Procedure for copy and exchange
  27. Functional overview
  28. Overlapping lighting groups
  29. Parameters
  30. Parameter window General
  31. Parameter window Light sensor
  32. Parameter window Central
  33. Parameter window Status - Central
  34. Parameter window Gx Group
  35. Parameter window - Gx Status
  36. Parameter window - Gx Fault
  37. Parameter window - Gx Functions
  38. Parameter window - Gx Staircase lighting
  39. Parameter window - Gx Light controller
  40. Parameter window - Gx Control Operating
  41. Parameter window - Gx Slave
  42. Parameter window Scenes
  43. Parameter window Scene x
  44. Communication objects
  45. Short overview of the communication objects
  46. Communication objects General
  47. Communication objects DALI output
  48. Communication objects Group x
  49. Communication objects Scene x/y
  50. Communications object Lighting control
  51. Communication objects function - Slave
  52. Communication objects function Staircase lighting
  53. Planning and application
  54. Function diagram
  55. Monitoring of lamps and ballasts
  56. Exchange of DALI devices
  57. Effect of ageing on lamps
  58. Burning-in of luminaires
  59. Control telegram and status with a communication object
  60. Staircase lighting
  61. Staircase lighting with
function Light control
  62. Constant lighting control
  63. Changing the setpoint
  64. Deactivation of constant lighting control
  65. Follow-up time of the inactive light control
  66. Brightness detection
  67. Scene
  68. Slave
  69. Slave with offset function
  70. DALI lighting curve
  71. Characteristic adjustment of the linear lighting curve
  72. Characteristic adjustment of phys-min brightness value
  73. A Appendix
  74. A.2 Code table Diagnostics High byte (No. 6)
  75. A.3 Code table Request diagnostics (No. 7)
  76. A.4 Table of fading times Fade time
(No. 8)
  77. A.5 Code table Status sensors (No. 9)
  78. A.6 Code table Fault group/device code (No. 19)
  79. A.7 Code table 8 bit scene (No. 212)
  80. A.8 Further information about DALI
  81. A.9 Ordering details
i-bus KNX first page preview

i-bus KNX

Brand: ABB | Category: Controller
Table of contents
  1. Table Of Contents
  2. Table Of Contents
  3. General
  4. Product and functional overview
  5. Properties of the 1-10 V interface
  6. Device technology
  7. Connection schematics
  8. Dimension drawings
  9. Light Sensor LF/U 2.1
  10. Dimension drawing
  11. Polar diagram
  12. Assembly and installation
  13. Description of the inputs and outputs
  14. Assignment of the physical address of a KNX device
  15. Supplied state
  16. Commissioning
  17. Parameters
  18. Parameter window General
  19. Parameter window Light sensor
  20. Parameter window X: General
  21. Parameter window X: Function
  22. Parameter window X: Switch
  23. Parameter window X: Dimming
  24. Parameter window X: Value
  25. Parameter window X: Presets
  26. Parameter window X: Scene (1) to X: Scene (6)
  27. Parameter window X: Charact. adj
  28. Parameter window X: Control
  29. Parameter window X: Control Dynamics
  30. Parameter window X: Control Operating
  31. Parameter window X: Slave
  32. Parameter window X: Staircase light
  33. Communication objects
  34. Per output
  35. Per output for function Preset
  36. Per output for function 8 bit scene
  37. Per output for function Block
  38. Per output for function Light control
  39. Per output for function Slave mode
  40. Per output for function Staircase light
  41. Per output for the Diagnostics
  42. Planning and application
  43. Load current influence
  44. Control current influence
  45. Function chart
  46. Staircase lighting time
  47. Preset description
  48. bit scene
  49. Characteristic adjustment
  50. Differing light strips
  51. Constant lighting control
  52. Constant lighting control properties
  53. Positioning of the Light Sensor
  54. Commissioning/calibration of the constant lighting control
  55. Effect of ageing on lamps
  56. How does brightness detection function
  57. Slave mode
  58. Behaviour with bus voltage failure, recovery download and ETS reset
  59. Interdependence of the functions
  60. A Appendix
  61. A.3 Table for the object Status function
  62. A.4 Terminology in lighting technology
  63. A.4.2 Light density
  64. A.5 Energy efficiency potential with domestic and intelligent installation systems
  65. A.6 LR/S x.16.1 scope of delivery
  66. A.8 Ordering information
i-bus KNX first page preview

i-bus KNX

Brand: ABB | Category: Temperature Controller
Table of contents
  1. Table Of Contents
  2. Table Of Contents
  3. Table Of Contents
  4. Table Of Contents
  5. Table Of Contents
  6. Table Of Contents
  7. Table Of Contents
  8. Notes on the instruction manual
  9. Safety
  10. Intended use
  11. Target group / Qualifications of personnel
  12. Safety instructions
  13. Information on protection of the environment
  14. Setup and function
  15. Device overview
  16. Support rings
  17. Scope of supply
  18. Technical data
  19. Connection, installation / mounting
  20. Installation site
  21. Mounting
  22. Electrical connection
  23. Commissioning
  24. Assigning the group address(es)
  25. Updating options
  26. Operation
  27. Control elements
  28. Colour concept
  29. Displays / messages
  30. Switching On and Off
  31. Adjust temperature
  32. Adjusting the fan speed levels
  33. Eco mode
  34. Changing the operating status (heating/cooling)
  35. Maintenance
  36. Description of application and parameters
  37. Overview of functions
  38. Application "Device settings
  39. Acoustic feedback signal via object
  40. Feedback signal after bus voltage recovery
  41. Activation of the acoustic feedback signal with
  42. Ending the alarm automatically
  43. Time for automatic ending via object
  44. Proximity - Application
  45. Automatic switchover time
  46. LED colour in a blocked state
  47. Device enable - Application
  48. After bus voltage recovery the device is
  49. Switchover time via object
  50. Brightness of the LED during blockage
  51. During operation function - Application
  52. Application "Primary function
  53. Object type
  54. Reaction on rising edge
  55. Reaction on falling edge
  56. Value 1/Value 2
  57. Value 2
  58. Control settings - General
  59. Setting the temperature unit via object
  60. Waiting period for display of actual temperature
  61. Control settings — Brightness setting
  62. Control settings — Button configuration
  63. Button top right
  64. RTC - General
  65. General — Control function
  66. General - Operating mode after reset
  67. General - Additional functions/objects
  68. Heating control
  69. Heating control — Heating type
  70. Heating control — I-component (min.)
  71. Basic stage heating
  72. Basic stage heating — Control value difference for sending of heating control value
  73. Basic stage heating — Maximum control value (0 - 255)
  74. Control of additional heating stage
  75. Control of additional heating stage — Additional heating type
  76. Control of additional heating stage — I-component (min)
  77. Additional heating stage
  78. Additional heating stage — Cyclic sending of the control value (min)
  79. Cooling control
  80. Cooling control — Cooling type
  81. Cooling control — I-component (min.)
  82. Basic stage cooling
  83. Basic stage cooling — Hysteresis (x 0.1°C)
  84. Basic stage cooling - PWM cycle cooling (min)
  85. Control of additional cooling stage
  86. Control of additional cooling stage — Cooling type
  87. Control of additional cooling stage — P-component (min)
  88. Additional cooling stage
  89. Additional cooling stage — Cyclic sending of the control value (min)
  90. Settings of basic load
  91. Combined heating and cooling modes
  92. Combined heating and cooling modes — Heating/cooling control value output
  93. Setpoint settings
  94. Setpoint settings — Setpoint temperature for heating and cooling comfort (°C)
  95. Setpoint settings — Set-point temperature for frost protection (°C)
  96. Setpoint settings — Set-point temperature for heat protection (°C)
  97. Setpoint settings - Basic set value is
  98. Setpoint adjustment
  99. Setpoint adjustment — Maximum manual reduction during cooling mode (0 - 9°C)
  100. Setpoint adjustment — Resetting the manual adjustment via object
  101. Temperature reading — Inputs of weighted temperature reading
  102. Temperature reading — Weighting of external measurement 2 (0 to 100%)
  103. Temperature reading — Adjustment value for internal temperature measurement (x 0.1°C)
  104. Alarm functions
  105. Alarm functions — Frost alarm temperature for HVAC and RHCC status (°C)
  106. Fan coil settings - Fan speed levels
  107. Fan coil settings - Fan speed levels — Level output
  108. Fan coil settings heating
  109. Fan coil settings for cooling
  110. Summer compensation
  111. Summer compensation -— (Lower) Starting temperature for summer compensation (°C)
  112. Summer compensation — (Upper) exit temperature for summer compensation (°C)
  113. Application - LED function
  114. Object type for status object
  115. Brightness of the colours
  116. Colour for On
  117. Colour for Zone 1 (corresponds to 0%)
  118. Colour for Zone 2 (starting at 1%)
  119. Colour for Zone 3
  120. Colour for Zone 4 (up to 99%)
  121. Colour for Zone 5 (corresponds to 100%)
  122. Colour of function illumination
  123. Day/Night mode
  124. Light scene memory function
  125. Alarm function
  126. Channel x - Application
  127. Application - Cyclic telegrams
  128. Cycle time
  129. Enable object after return of voltage
  130. Value for cyclic sending
  131. Application - Priority
  132. Application - Logic gate
  133. Logical function
  134. Initial value input x
  135. Object type output
  136. Value of the output object for logic true
  137. Value of the output object for logic untrue
  138. Application - Gate
  139. Filter function
  140. Data flow direction
  141. Object value enable object
  142. Save input signal
  143. Application - Staircase lighting
  144. Object type/number
  145. Retriggering
  146. Time for switch-off pre-warning (s)
  147. Channel name
  148. Delay time
  149. Overwrite delay time during download
  150. Output sends
  151. Number of actuator groups
  152. Object type actuator group x
  153. Scene can be saved
  154. Value
  155. Notes
  156. Index
i-bus KNX first page preview

i-bus KNX

Brand: ABB | Category: Controller
Table of contents
  1. Table Of Contents
  2. Table Of Contents
  3. General
  4. Using the product manual
  5. Notes
  6. Product and functional overview
  7. Device technology
  8. Connection diagrams JRA/S X.230.5.1
  9. Dimension drawing JRA/S X.230.5.1
  10. Technical specifications
  11. Connection diagram JRA/S 4.24.5.1
  12. Dimension drawing JRA/S 4.24.5.1
  13. JRA/S X.230.2.1 Blind / Roller Shutter Actuator with Manual Operation, x-fold, 230 V, MDRC
  14. Connection diagram JRA/S X.230.2.1
  15. Dimension drawing JRA/S X.230.2.1
  16. JRA/S X.230.1.1 Blind / Roller Shutter Actuator with Manual Operation, x-fold, 230 V, MDRC
  17. Connection diagrams JRA/S X.230.1.1
  18. Dimension drawing JRA/S X.230.1.1
  19. Mounting and installation
  20. Manual operation
  21. Display elements
  22. Start-up
  23. Conversion
  24. Procedure
  25. Copying and exchanging parameter settings
  26. Copy/Exchange channels dialog
  27. Parameters
  28. Parameter window General
  29. Parameter window Manual operation
  30. Parameter window Weather alarms
  31. Parameter window A: General
  32. Parameter Operation mode control with and without slat adjustment
  33. Parameter window A: Safety/weather
  34. Parameter window A: Drive
  35. Parameter window A: Blinds/shutter
  36. Parameter window A: Functions
  37. Parameter window A: Positions/Presets
  38. Parameter window A: Automatic Sun Protection
  39. Parameter window A: Scene
  40. Parameter window A: Status messages
  41. Parameter Operation mode: Ventilation flaps, switch mode
  42. Communication objects
  43. Communication objects General
  44. Communication objects, output A...X Control with and without slat adjustment
  45. Communication objects Output A...X Operation mode Ventilation flaps, switch mode
  46. Planning and application
  47. Automatic travel detection
  48. Specifying travel times
  49. Blind/slat settings
  50. Safety functions
  51. Positions
  52. Reaction on bus voltage failure
  53. A Appendix
  54. A.2 Code table Scene (8 bit), DPT 18.001
  55. A.4 Order details
  56. A.5 Notes
i-bus KNX first page preview

i-bus KNX

Brand: ABB | Category: Gateway
Table of contents
  1. Table Of Contents
  2. Table Of Contents
  3. General
  4. Product and functional overview
  5. DALI general
  6. DGN/S 1.16.1 system description (group control)
  7. DGN/S 1.16.1 emergency lighting test
  8. Device Technology
  9. Technical data
  10. Circuit diagram
  11. Dimension drawing
  12. Assembly and installation
  13. Description of the inputs and outputs
  14. Manual operation
  15. Display elements
  16. Commissioning
  17. Overview
  18. Conversion of previous application program versions
  19. Procedure
  20. Parameters
  21. Parameter window General
  22. Parameter window Central
  23. Parameter window - Emergency
  24. Parameter window - Status
  25. Parameter window Gx Group
  26. Parameter window – Gx Status
  27. Parameter window – Gx Fault
  28. Parameter window – Gx Slave emergency
  29. Parameter window - Gx Slave
  30. Parameter window - Gx Sequence
  31. Parameter window - Gx Staircase lighting
  32. Parameter window Scenes
  33. Parameter window Scene x
  34. Parameter window Sequence
  35. Parameter window Emergency Converter
  36. Parameter window Cx...Cy Converter
  37. Parameter window - Cx...Cy Test
  38. Communication objects
  39. Brief overview of the communication objects
  40. Communication objects General
  41. Communication objects DALI output
  42. Communication objects Group x
  43. Communication objects Fault
  44. Communication objects Converter x
  45. Communication objects Scene x/y
  46. Communication objects function Slave
  47. Communication objects function Sequence
  48. Communication objects function Staircase lighting
  49. Planning and Application
  50. Function chart
  51. Monitoring of lamps and ballasts
  52. Exchange of DALI devices
  53. Burning-in of luminaries
  54. Staircase lighting
  55. Scene
  56. Slave
  57. Sequence
  58. DALI lighting curve
  59. Characteristic adjustment of the linear dimming curve
  60. Characteristic adjustment with physical minimum dimming value
  61. Appendix
  62. Code table 8 bit scene (no. 232)
  63. Code table Diagnostics byte "request" (no. 25)
  64. Code table Diagnostics byte "feedback" (no. 25)
  65. Further information about DALI
  66. Scope of delivery
  67. Ordering Information
  68. DALI equipment
  69. Notes
i-bus KNX first page preview

i-bus KNX

Brand: ABB | Category: Controller
Table of contents
  1. Table Of Contents
  2. Table Of Contents
  3. Table Of Contents
  4. Table Of Contents
  5. General
  6. Safety
  7. Product Overview
  8. Ordering details
  9. Valve drive controller VC/S 4.1.1, MDRC
  10. Dimension drawing
  11. Connection diagram
  12. Operating and display elements
  13. Technical data
  14. Device type
  15. Inputs
  16. Valve drive controller VC/S 4.2.1, manual operation, MDRC
  17. KNX operation
  18. Function
  19. Input functions
  20. Output functions
  21. Special operating states
  22. Mounting and installation
  23. Mounting on DIN rail
  24. Integration in the i-bus ® Tool
  25. Assignment of the physical address
  26. Software/application
  27. Parameters
  28. General parameter window
  29. State after sending and switching delay has elapsed
  30. Enable group object "In operation", 1 bit
  31. Manual operation parameter window
  32. Automatically reset from manual operation to KNX operation
  33. Application parameters parameter window
  34. Channel function
  35. Channel function parameter window
  36. Control value after bus voltage recovery
  37. Control value after ETS download
  38. Temperature controller parameter window
  39. Minimum control value for basic load > 0
  40. Basic load active when controller off
  41. Send current room temperature cyclically (0 = cyclical sending deactivated)
  42. Basic-stage heating parameter window
  43. Additional-stage heating parameter window
  44. Basic-stage cooling parameter window
  45. Additional-stage cooling parameter window
  46. Setpoint manager parameter window
  47. Operating modes
  48. Operating mode after bus voltage recovery, ETS download and reset
  49. Setpoint specification and adjustment
  50. Selection of Absolute
  51. Selection of Relative
  52. Setpoint for frost protection (building protection, heating)
  53. Heat protection setpoint (building protection, cooling)
  54. Summer compensation
  55. Monitoring and safety parameter window
  56. Use forced operation
  57. Forced operation dependent parameters
  58. Valve output A parameter window
  59. Valve output
  60. Selection of Thermoelectric (PWM)
  61. Open/close signal
  62. Send status values
  63. Enable manual valve override
  64. Valve purge
  65. Setpoint adjustment parameter window
  66. Connect analog room control unit to physical device input a
  67. Input x parameter window
  68. Window contact
  69. Dew point sensor
  70. Fill level sensor
  71. Temperature sensor
  72. Binary signal input
  73. Connect analog room control unit
  74. Group objects
  75. Group objects General
  76. Group objects Channel A – General
  77. Group objects Channel A – Valve A
  78. Group objects Channel A – Input a
  79. Group objects Channel A – Controller
  80. Operation
  81. Maintenance and cleaning
  82. Disassembly and disposal
  83. Environment
  84. Planning and application
  85. Compatibility with different drive types
  86. Actuator channel
  87. Explanation of controller function
  88. Pulse width modulation (PWM)
  89. PI controller (continuous)
  90. PI controller (PWM)
  91. Appendix
  92. Status byte Valve
  93. Status byte channel
i-bus KNX first page preview

i-bus KNX

Brand: ABB | Category: Accessories
i-bus KNX first page preview

i-bus KNX

Brand: ABB | Category: Controller
Related products
i-bus 6115-24-500i-bus 6116-24-500tacteo KNXibus 6117-24-500BASABCHCKEVA 36 G23KEVA 36 G22KEVA 36 G2 SeriesABB-free@home BI-S-1-xx-WL Series
ABB categories
More ABB categories
Manuals database logo
manualsdatabase
Your AI-powered manual search engine