5-6 C HAPTER 5: A DVANCED M ANAGEMENTExample 2The example shown in Figure 5-6 illustrates twoVLANs spanning two Switch 1000 units. VLAN 1 isable to talk to VLAN 2 using the connectionbetween each VLAN and the router. Ports within thesame VLAN but on different Switches communicateusing the VLT.To set up this configuration:1 Use the VT100 screens or VLAN Server database to:a Place ports 1–6 and 13–18 of both Switch unitsin VLAN 1.b Place ports 7–12 and 19–24 of both Switch unitsin VLAN 2.2 Connect port 26 of the higher Switch to Server 1.3 Connect port 26 of the lower Switch to Server 2.4 Use the VT100 screens or VLAN Server database to:a Place port 26 of the higher Switch in VLAN 2.b Place port 26 of the lower Switch in VLAN 1.5 Connect a port on the higher Switch to a port inthe lower Switch.6 Use the VT100 screens to specify that theSwitch-to-Switch port on the higher Switch is abackbone port and a VLT port.7 Use the VT100 screens to specify that theSwitch-to-Switch port on the lower Switch is a VLTport.Figure 5-6 VLAN configuration with two Switch 1000 units8 Connect a VLAN 1 port on the lower Switch to therouter.9 Connect a VLAN 2 port on the lower Switch to therouter.
