Virtual LANs (VLANs) 5-7Example 3The example shown in Figure 5-7 illustrates twoVLANs spanning three Switch 1000 units and abasement Switch 3000 FX with a Plug-in Module.Each Switch 1000 connects into the basementSwitch using a VLT. The attached router allows thetwo VLANs to communicate with each other.To set up this configuration:1 Use the VT100 screens or VLAN Server database to:a Place ports 1–6 and 13–18 of all the Switch 1000units in VLAN 1.b Place ports 7–12 and 19–24 of all the Switch1000 units in VLAN 2.2 Connect a port on each Switch 1000 to a port inthe Switch 3000 FX.3 Use the VT100 screens to:a Specify that each Switch 1000 port connected tothe Switch 3000 FX is a backbone port.b Specify that each Switch 1000 port connected tothe Switch 3000 FX is a VLT port.c Specify that each Switch 3000 FX port con-nected to a Switch 1000 is a VLT port.4 Connect port 1 of the Switch 3000 FX to Server 1.5 Connect port 2 of the Switch 3000 FX to Server 2.6 Use the VT100 screens or VLAN Server database to:a Place port 1 of the Switch 3000 FX in VLAN 1.b Place port 2 of the Switch 3000 FX in VLAN 2.Figure 5-7 VLAN configuration with a basement Switch 3000 FX7 Connect two spare ports on the Switch 3000 FX tothe router.8 Use the VT100 screens or VLAN Server database tospecify that one Switch 3000 FX port connected tothe router is placed in VLAN 1, and the other isplaced in VLAN 2.
