|
4-22 CHAPTER 4: COMMANDSLogging Commands Table 4-18 describes Switch logging commands.Table 4-18 Logging CommandsCommand Descriptionshow log config Displays the log configuration, including the sysloghost IP address, the priority level of messages beinglogged locally, and the priority level of messages beingsent to the syslog host.show log {} {} Displays the current snapshot of the log. Optionsinclude:n priority — Filters the log to display message with theselected priority or higher (more critical). Prioritiesinclude critical, warning, and informational. If notspecified, informational priority messages andhigher are displayed.n subsystem — Filters the log to display messagesassociated with the selected Switch subsystem.Subsystems include Syst, STP Brdg, SNMP, Telnet,VLAN, and Port. If not specified, all subsystems aredisplayed.clear log Allows you to clear the log.config log display {}{}Allows you to configure the real-time log display.Options include:n priority — Filters the log to display message with theselected priority or higher (more critical). Prioritiesinclude critical, warning, and informational. If notspecified, informational priority messages andhigher are displayed.n subsystem — Filters the log to display messagesassociated with the selected Switch subsystem.Subsystems include Syst, STP Brdg, SNMP, Telnet,VLAN, and Port. If not specified, all subsystems aredisplayed.(continued)
|
