Configuring VLANs on the Switch 3800 5-11The Default VLANThe Switch 3800 ships with one default VLAN that has the followingproperties:n The VLAN name is default.n It contains all the ports on a new or initialized Switch.n The default VLAN is untagged, and has no VLANid or protocol filterassigned.Configuring VLANson the Switch 3800This section describes the commands associated with setting up VLANson the Switch 3800. Configuring a VLAN involves the following steps:1 Create and name the VLAN.2 Assign an IP address and subnet mask (if applicable) to the VLAN, ifneeded.3 Assign a VLANid, if any ports in this VLAN will use a tag.4 Assign one or more ports to the VLAN.As you add each port to the VLAN, decide if the port will use an802.1Q tag.
