3Com Switch 8800 Configuration Guide Chapter 32 ACL Configuration32-3Table 32-1 Requirements for defining ACLsItem Number range Maximum numberNumber-based basic ACL 2000 to 2999 1000Number-based advanced ACL 3000 to 3999 1000Number-based L2 ACL 4000 to 4999 1000Number-based user ACL 5000 to 5999 1000Name-based basic ACL -- --Name-based advanced ACL -- --Name-based L2 ACL -- --Name-based user ACL -- --Maximum sub-rules for an ACL 0 to 127 128Maximum sub-rules for the system -- 12288Table 32-2 Max ACL rules that can be activated on cardsCard Max ACL rules per card/port1-port 10GBASE-X (XENPAK)Advanced2-port 10GBASE-X (XFP) Advanced24-port 1000BASE-X (SFP) Advanced24-port 10/100/1000BASE-T (RJ45)Advanced48-port 10/100/1000BASE-T (RJ45)Access10121-port 10GBASE-X (XENPAK)2-port 10GBASE-X (XFP)4-port 10GBASE-X (XFP)12-port 1000BASE-X (SFP)24-port 1000BASE-X (SFP)24-port 10/100/1000BASE-T (RJ45)48-port 10/100/1000BASE-T (RJ45)1024 or 2048ACL rules are based on the number ofPacket Processors (PP) per blade. The24-port blades and 4-port 10G bladesboth use 2 PPs, therefore the max ACLrules is 2k (2048). The rest of the bladeshave a single PP and 1024 max ACLrules. The system can define up to 128rules per ACL for a maximum ofSum((number of ACLx) × (number ofrules per ACLx)).32.2 ACL ConfigurationThe following table describes the ACL configuration tasks for interface cards.
