3Com Switch 8800 Configuration Guide Chapter 32 ACL Configuration32-11Display ACL configuration display acl config { all | acl-number |acl-name }Display ACL applicationinformationdisplay acl running-packet-filter { all |interface { interface-name | interface-typeinterface-num } | vlan vlan-id }Display configuration informationof flow templatedisplay flow-template [ default | interfaceinterface-type interface-num | slot slotid |user-defined]Clear ACL statistics reset acl counter { all | acl-number |acl-name }The display acl config command only displays the ACL matching informationprocessed by the CPU. You can use the display qos-interface traffic-statisticcommands to view the ACL matching information during data forwarding.See the corresponding Command Manual for description of parameters.32.4 ACL Configuration Example32.4.1 Advanced ACL Configuration ExampleI. Network requirementsThe departments in the intranet are connected through 100 Mbps ports of the switches.The research and development (R&D) department is connected through the portEthernet2/1/1. The wage server of the financial department is at 129.110.1.2. Therequirement is to configure ACLs correctly to limit that the R&D department can onlyaccess the wage server at working time from 8:00 to 18:00.II. Network diagramAdministrative DeptFinancial DeptPresident's office129.111.1.2 Wage server129.110.1.2Switch#1#4#3#2To routerFigure 32-1 Network diagram for advanced ACL configuration
