3Com Switch 8800 Configuration Guide Chapter 50 SSH Terminal Service50-1650.1.6 SSH Client Configuration ExampleI. Network requirementsAs shown in Figure 50-4:z Switch A is used as an SSH client.z Switch B is used as the SSH server, and the IP address is 10.165.87.136.II. Network diagramPCIP address 10.165.87.136SSH clientSwitch BSSH serverSwitch APCIP address :Switch BSwitch AFigure 50-4 Network diagram for SSH clientIII. Configuration procedureConfigure the client to perform the first-time authentication of the server.z Employ password authentication mode, and start using the default encryptionalgorithm.Log onto the SSH2 server with IP address 10.165.87.136.[SW8800] ssh2 10.165.87.136Please input the username:sshuser1Trying 10.165.87.136Press CTRL+K to abortConnected to 10.165.87.136 ...Enter password:********************************************************** All rights reserved (1997-2004) ** Without the owner's prior written consent, **no decompiling or reverse-engineering shall be allowed.**********************************************************Configure the client to authenticate the server for the first time. system-view
