3Com Switch 8800 Configuration Guide Chapter 43 File System Management43-1043.3.5 Displaying and Debugging FTP ServerAfter the above configuration, execute display command in any view to display therunning of the FTP Server configuration, and to verify the effect of the configuration.Table 43-15 Display and debug FTP ServerOperation CommandDisplay FTP server display ftp-serverDisplay the connected FTP users. display ftp-userThe display ftp-server command can be used for displaying the configurationinformation about the current FTP server, including the maximum amount of userssupported by FTP server and the FTP connection timeout. The display ftp-usercommand can be used for displaying the detail information about the connected FTPusers.43.3.6 Disconnecting an FTP UserPerform the following configuration in system view.Table 43-16 Disconnect an FTP userOperation CommandDisconnect an FTP user. ftp disconnect user-name43.3.7 Introduction to FTP ClientAs an additional function provided by Ethernet switch, FTP client is an applicationmodule and has no configuration functions. The switch connects the FTP clients andthe remote server and inputs the command from the clients for correspondingoperations (such as creating or deleting a directory).43.3.8 FTP Client Configuration ExampleI. Network requirementsThe switch serves as FTP client and the remote PC as FTP server. The configurationon FTP server: Configure an FTP user named as switch, with password hello and withread & write authority over the Switch root directory on the PC. The IP address of aVLAN interface on the switch is 1.1.1.1, and that of the PC is 2.2.2.2. The switch andPC are reachable.
