Displaying and Changing System Feature Information 129Stopping DataMonitoringYou can stop data monitoring by the roving analysis port and remove themonitor port from the roving analysis set up by using the stop commandon the Analyzer menu.To stop data monitoring by the roving analysis port and remove themonitor port:At the Top-level menu, enter:feature analyzer stopEnabling andDisabling BroadcastStorm ControlYou can enable or disable broadcast storm control for the Switch unit orstack using the broadcastStormControl command on the Featuremenu.To enable or disable broadcast storm control for the Switch:1 At the Top-level menu, enter:feature broadcastStormControlThe following prompt is displayed:Enter new value (disable, enable) [disable]:2 Enter enable or disable.If you enter enable, the following prompt is displayed:Enter rising threshold in pps (0-200000) [2976]:3 Enter the value for the rising threshold in packets per second.The following prompt is displayed:Enter falling threshold in pps (0-200000) [1488]:4 Enter the value for the falling threshold in packets per second.The following prompt is displayed:Enter time period in seconds (10-60) [30]:5 Enter the time period value in the range of 10 to 60 seconds.
