Displaying and Changing IP-related Information 133Displaying SummaryTrunk InformationYou can display summary trunk information about all trunks supported bythe stack using the summary command on the Trunk menu.To display summary trunk information:1 At the Top-level menu, enter:feature trunk summary2 The summary trunk information is displayed as shown in the examplebelow.Displaying andChanging IP-relatedInformationYou can display and change IP-related information for the current Switchunit in the stack using the commands on the IP menu. These commandsallow you to: Specify the IP and SLIP information for the Switch Display the IP information for the Switch Specify whether the Switch uses BOOTP Ping other devices on your networkTo display and change IP-related information for another Switch unit inthe stack, you need to select that unit using the unit command. Formore information, see “Moving the Focus of the Command LineInterface” on page 141.Specifying IP and SLIPInformationYou can specify IP and SLIP information for the current Switch unit in thestack using the define command on the IP/Interface menu.To carry out this command for the first time after installing your switch,you need to connect a terminal or terminal emulator to the console portusing a null modem cable. See “Setting Up Command Line InterfaceManagement”on page 36 for more information about connecting to theconsole port.In UseUnit 1 Trunk 1 NoUnit 1 Trunk 2 NoUnit 2 Trunk 1 NoUnit 2 Trunk 2 NoSelect menu option:
