Displaying and Changing System Feature Information 131Removing a ResilientLinkYou can remove resilient links from the Switch units within the stackusing the remove command on the Resilience menu.To remove a resilient link:1 At the Top-level menu, enter:feature resilience removeThe following prompt is displayed:Select resilient link index (1,2):2 Enter the resilient link index number for the resilient link that you wish toremove.Swapping over ActiveLinksYou can swap over the resilient links on the Switch units within the stackto redesignate the active link by using the swap command on theResilience menu.To swap over the active link:1 At the Top-level menu, enter:feature resilience swapThe following prompt is displayed:Select resilient link index (1,2):2 Enter the resilient link index number for the resilient link that you wish tobecome active.Adding a Port to aTrunkYou can add a single port to a trunk on the current Switch unit using theaddPort command on the Trunk menu.To add a port to a trunk:1 At the Top-level menu, enter:feature trunk addPortThe following prompt is displayed:Select trunk index (1-2):2 Enter the index number of the trunk that you wish to add a port to.The following prompt is displayed:Enter ports (1,2,7):
