Displaying and Changing Stack Information 1492 Enter the name of the user to be modified.The following prompt is displayed:Enter the password:3 Enter a password for the user.The following prompt is displayed:Re-enter the password:4 Enter the password for the user again.The following prompt is displayed:Enter the community string []:5 Enter a community string for the user.Removing UserDetailsYou can remove user details from the stack using the remove commandon the System/Security/User menu.To remove user details from the stack:1 From the Top-level menu, enter:system security user removeThe following prompt is displayed:Enter the user name (,all):2 Enter the name of the user that is to have its details removed, or enterall to remove the details of all users (except default users).Displaying AccessRightsYou can display the access rights for all access levels in the stack using thedisplay command on the System/Security/Access menu.To display the access rights for the stack: From the Top-level menu, enter:system security access displayThe access rights are displayed.An example of the access rights information is shown below:Access Level SNMP Console Telnet Webmonitor enable enable enable enablemanager enable enable enable enablesecurity enable enable enable enable
