Checking Unit and Drive Status through 3DMwww.3ware.com 149Tip: You can scroll both sections of the Drive Information page to bringadditional drive information or drives into view. Press Tab to movebetween the two sections.Figure 63. Drive Information page (3BM)Enclosure Drive LED Status IndicatorsIf you have a supported enclosure, the LEDs on your enclosure may be able toprovide some status information about your drives and units.Note: The following table is an example of how LEDs may be used. Check withyour chassis or enclosure documentation for more details. Not all features may besupported or implemented in the same way on all chassis.list of supportedenclosures is available at http://www.3ware.com/products/sys_compatibility.aspTable 11: Meaning of LED Colors and BehaviorColor Drive StatusSolid green OKBlinking green IdentifyThis occurs when you have used the Identify command in 3DMto locate a particular drive or unit. (See “Locating a Drive byBlinking Its LED” on page 152.)Black No driveSolid Amber Hot spareBlinking amber RebuildingThe drive in this slot is part of a RAID unit that is currentlyrebuilding. You can continue to use the unit. For moreinformation, see “Rebuilding Units” on page 167.
