Troubleshooting286 3ware SAS/SATA RAID Software User Guide, Version 9.5.1ActionIf this drive was the only one to lose power, check the cable connections.Also, check that your power supply is adequate for the type and number ofdevices attached to it.See AlsoFor troubleshooting information and a link to drive manufacturer diagnosticutilities, see http://www.3ware.com/KB/article.aspx?id=14927.003B Rebuild pausedEvent TypeInformationCauseThe rebuild operation is paused.Rebuilds are normally paused for two (formerly ten) minutes after a systemfirst boots up and during non-scheduled times when scheduling is enabled.Disabling or modifying the schedule with 3DM or CLI will allow the rebuildto resume.See Also“Scheduling Background Tasks” on page 173003C Initialize pausedEvent TypeInformationCauseThe initialization is paused.Initializations are normally paused for two (formerly ten) minutes after asystem first boots up. Initialization is also paused during non-scheduled timeswhen scheduling is enabled. Initializations follow the rebuild schedule.ActionIf you want the initialize to resume, you can disable or modify the schedulethrough 3DM or CLI.
