Parameters 7905.04 Fan on-timecounterRunning time of the drive cooling fan. Can be reset on thecontrol panel by keeping Reset depressed for over 3seconds.-0…4294967295 d Cooling fan run-time counter. 1 = 1 d05.11 Invertertemperature %Estimated drive temperature in percent of fault limit. --40.0 … 160.0% Drive temperature in percent. 1 = 1%0606 Control and statuswordsDrive control and status words.06.01 Main control word The main control word of the drive. This parameter shows thecontrol signals as received from the selected sources (suchas digital inputs, the fieldbus interface and the applicationprogram).The bit assignments of the word are as described on page279. The related status word and state diagram are presentedon pages 280 and 281 respectively.This parameter is read-only.-0000h…FFFFh Main control word. 1 = 106.02 Application controlwordThe drive control word received from the application program(if any). The bit assignments are described on page 279.This parameter is read-only.-0000h…FFFFh Application program control word. 1 = 106.03 FBA A transparentcontrol wordThe unaltered control word received from the PLC throughfieldbus adapter A.This parameter is read-only.-00000000h …FFFFFFFFhControl word received through fieldbus adapter A. -06.11 Main status word Main status word of the drive.The bit assignments are described on page 280. The relatedcontrol word and state diagram are presented on pages 279and 281 respectively.This parameter is read-only.-0000h…FFFFh Main status word. 1 = 1No. Name/Value Description Def/FbEq16
