61204659L1-1A 1-1SECTION 1, INTRODUCTIONSection 1Introduction1. PRODUCT OVERVIEWThe MX2800 STS-1 is a SONET multiplexer that consolidates T1 and E1 signals into an STS-1 signal.This unit provides a cost-effective, versatile tool for combining independent T1s or E1s over the sameSTS-1 carrier.Embedded SNMP (simple network management protocol) and Telnet are available through the modemport using SLIP/PPP or through the 10Base-T ethernet port. Using the Management Information Base II(MIB II), RFC 1595 standards, and an ADTRAN enterprise MIB, the MX2800 STS-1 can be configured,monitored, and diagnosed with standard SNMP network management programs such as HP OpenView™(from Hewlett Packard) and Spectrum® (from Cabletron). In addition, the SysLog Host Daemon allowsremote monitoring, collecting, and logging of MX2800 STS-1 events in real time. This information can beuseful during installation setups and/or troubleshooting.Complete configuration, loopbacks, and performance monitoring are available through SNMP, Telnet, or aVT100 terminal interface. This connection can be made via ethernet, a local EIA-232 link, or through thebuilt-in V.34 modem. The modem can dial-out a “cry for help” for units located in unmanned facilities.The MX2800 STS-1 is designed for either desktop use or for installation in a 19-inch or 23-inch rack.The major features of the MX2800 STS-1 are as follows:• Built-in 1:1 redundancy• Hot-swappable controller cards• Independent, dual-load sharing, redundant power supplies• Embedded SNMP and Telnet management through 10Base-T ethernet or SLIP/PPP dialup• Detailed performance monitoring for local and remote units• Simplified configuration through the VT100 terminal menu structure• Integrated V.34 modem for dial-up and dial-out access• Capable of backhauling multiple service types (T1/E1)• AC or DC power• VT Hairpinning• VT cross-connect to any DS1• NEBS Level 3 compliant
