9-5Duralink64 Standard Driver for NetWareConfiguring the PortsAfter installing the Duralink64 Standard driver, use the followingsteps to configure the ports.1 In the Main Menu, select Configure Ports, and then press Enter.Figure 9-4. Duralink64 Standard Setup Main Menu2 In the Ports screen, make sure you know which port names areassigned to the actual ports on the NIC.Figure 9-5. The port names (Adptsf1, Adptsf2, etc.) do not correspond to thephysical PCI slot numbers on the motherboard.Autodetect (default)Autodetect (default)Autodetect (default)Autodetect (default)Autodetect (default)Autodetect (default)Autodetect (default)Autodetect (default)EnabledEnabledEnabledEnabledEnabledEnabledEnabledEnabled1 Adptsf12 Adptsf23 Adptsf34 Adptsf45 Adptsf56 Adptsf67 Adptsf78 Adptsf8No. Port Name NIC Connection Type StatusANA-62044/TX:[1]ANA-62044/TX:[2]ANA-62044/TX:[3]ANA-62044/TX:[4]ANA-62044/TX:[1]ANA-62044/TX:[2]ANA-62044/TX:[3]ANA-62044/TX:[4]
