10-17Duralink64 Failover for NetWareRemoving DriversThe following procedures are to be used if a new driver needs to beinstalled to replace an existing driver.Removing the Duralink64 Failover DriverTo remove the Duralink64 Failover Driver use the following steps:1 Insert the Duralink64 Drivers For Netware diskette.2 At the system console prompt, type load a:\nwserver\setupsfand press Enter.3 Select Failover from the Adaptec window.4 In the Main Menu, select Uninstall Software, and press Enter.5 In the Uninstall the Software box, select Yes and press Enter.6 In the Main Menu, Press Esc to exit setupsf.r
