10-8DuraLAN Fast Ethernet NICs User’s Guide11 OPTIONAL . To rename the default Failover pair name:a From the Failover Pair Configuration menu, select SetFailover Pair Name, and press Enter.b In the Failover Pair Name box, type the pair name, and thenpress Enter.Figure 10-11. Failover Pair BoxFigure 10-12. Pair Name Box12 To review the ports assigned to the pair, select DisplayExisting Ports from the Set Failover Pairs menu, and thenpress Enter. When you select Display Existing Ports, this box isdisplayed as read-only.Figure 10-13. Existing Ports Box13 Press Esc until you return to the Main Menu.14 To create more pairs, repeat Steps 1 through 13.15 Continue to Assigning the Protocols.Pair NameFailover Pair Name1 pair1pair1List of Existing PairsList of ExistingPair Name1 MarcomMarcomList of Existing PairsList of Existing1. Adptsf12. Adptsf2Existing Ports
