10-6DuraLAN Fast Ethernet NICs User’s GuideCreating the Failover PairsThe Failover pair consists of two ports only: the primary port andthe backup port.1 In the Main Menu, select Set Failover Pairs, and then pressEnter.2 In the List of Existing Pairs box, press Ins.Figure 10-5. List of Existing Pairs Box3 Select the pair, and then press Enter. A default pair name uses thenaming convention: first pair= Pair1, second pair=Pair2, thirdpair=Pair3, etc.Figure 10-6. List of Existing Pairs4 In the Failover Pair Configuration menu, select Add/RemovePorts, and then press Enter.Figure 10-7. Failover Pair Configuration MenuList of Existing PairsNo Failover Pairs currently existList of Existing PairsList of Existin1. Pair1List of Existing PairsFailover Pair ConfigurationList of ExistiAdd/Remove PortsSet Failover Pair NameFailover Pair NamePair11. Pair1Display Existing Ports
