7-3Duralink64 Failover for Windows NT5 Repeat steps 1 through 4 for each existing port.6 When you are done, click OK.7 Continue with Creating the Failover Pair.Creating the Failover PairYou can create Failover pairs in the Configuration tab. A Failoverpair consists of two ports only—the primary port and the backupport.Windows NT 4.0To create Failover pairs, follow these steps:1 From the Available Adaptec Ports box, click a port to be designatedas a primary port.Figure 7-2. Failover Configuration Tab2 Click Add. The port is added under Primary Port in the Failover Pairlist.3 To assign a backup to the primary port, click the appropriate portfrom the Available Adaptec Ports box, and then click Add. The portis added in the Backup Port field.
