9-11Duralink64 Standard Driver for NetWareRestarting the ServerAfter installing the Standard driver and configuring the ports, youmust restart the server.1 In the Internetworking Configuration menu, press Esc.2 In the Exit INETCFG box, select Yes, and then press Enter.3 In the Add Initialize Commands to autoexec.ncf box, select Yes,and then press Enter.4 The next screen indicates that the configuration will beactivated. Press Enter.5 At the server console type down and then press Enter.6 Type restart server and then press Enter.7 O PTIONAL. After the server is restarted you can review thecurrent settings. Type config at the console prompt, and thenpress Enter.Troubleshooting TipAt system reboot, I receive a message that the NIC configuration containsinvalid settings. What should I do?1 Follow the instructions at the server prompt.2 Document each of your selections.3 Return to inetcfg.4 Use the Internetworking Configuring menu to access thosescreens you must modify.
