12-2DuraLAN Fast Ethernet NICs User’s GuideInstalling Novell Client32DOSThis section provides instructions on installing the ADPTSF 32-bitdriver for Novell Client32 using the ODI driver. Please note thatDuraLAN products do not support 16-bit drivers.1 Download the latest version of Novell NetWare Client32 viathe Novell web site, www.novell.com.2 Start DOS.3 Insert your Novell NetWare Client32 package.4 Type install and then press Enter.5 Follow the instructions on your screen. Please refer to SelectingOptions if you are not sure which option to select.6 When you are done, you may confirm settings instartnet.bat.Note: This installation setup assigns settings to one portonly. To assign settings to multiple ports, you must editstartnet.bat. See Editing startnet.bat on page 12-4.
